Cisco UCS 5100 Upgrade Instructions page 6
Server blade
Hide thumbs
Also See for UCS 5100:
- Setup (17 pages) ,
- Firmware manual (10 pages) ,
- Quick start manual (8 pages)
Advertisement
3.
Associate the created Host Firmware Package policy to a Service Profile.
This association automatically updates and activates the firmware in the server and adapter with the
new versions and reboots the server. Complete these steps:
a.
In the Navigation pane, click the Servers tab.
b.
On the Servers tab, expand Service Profiles.
c.
Select the desired Service Profile.
d.
On the right pane, click the Policies tab of the selected Service Profile.
e.
Extend the Firmware Policies drop down container and select the previously created Host
Firmware Package from the Host Firmware menu.
f.
Save the changes.
Note: If your Service Profile is currently associated with a server, this change causes an
immediate server reboot with the BIOS installation. If your Service Profile is not associated
with a server, apply it to a blade in order for the BIOS upgrade to take effect.
Advertisement
