Kool-It ikon Series Service, Installation And Care Manual page 11

Service and Installation Manual
MAINTENANCE
Swing Door Replacement and Adjustment
1. Open the bottom shroud and hold the door, then loose bottom hinge's screws and take off the old door;
2. Prepare new door, insert top pin into top hinge, get one bottom hinge to hold the door by the bottom pin ,
then fasten bottom hinge securely to the door frame with three screws;
3. Allow the door to freely swing, make sure it swing close by itself with no restriction;
4. Plug the unit in and make sure the lock work well;
5. If not, adjust the door height by adding the plastic spacer/washer provided to the bottom hinge pin.
Sliding Door Replacement and Adjustment
1. Take off the hook of counterweight of door from top of the door;
2. Hold the door up until it's bottom edge over the channel a little, move the door out across the channel, lay
the door down;
3. Prepare new door, hold the door insert into top channel until bottom edge over bottom channel, move
bottom of door across the channel wall and lay it down to the channel.
11