Self-Diagnosis Display/Warning; Indicators - Sony Handycam DCR-SR35E Operating Manual

your computer.
Your camcorder is not recognized by
the computer.
Disconnect devices from the USB jack of

the computer other than the keyboard,
mouse, and your camcorder.
Disconnect the USB cable from the

computer and the Handycam Station, and
restart the computer, then connect the
computer and your camcorder again in an
orderly manner.

Self-diagnosis display/Warning

indicators

If indicators appear on the LCD screen,
check the following.
If the problem persists even after you have
tried a couple of times, contact your Sony
dealer or local authorized Sony service
facility.
Indicators/Messages Causes/Solutions
The battery pack is not
C:04:

an "InfoLITHIUM"
battery pack (H series).
Use an "InfoLITHIUM"
battery pack (H
series)(p. 8).
Connect the DC plug

of the AC Adaptor to
the DC IN jack of the
Handycam Station or
your camcorder securely
(p. 8).
Remove the power
C:13: /

source. Reconnect it and
C:32:
operate your camcorder
again.
E:20: / A malfunction that

you cannot service has
E:31: /
occurred. Contact your
E:61: /
Sony dealer or local
E:62: /
E:91: / authorized Sony service
facility. Inform them of
E:94:
the 5-digit code, which
starts from "E."
Indicators/Messages Causes/Solutions
101-0001
The file is damaged or

unreadable.
An error may have

occurred with the
hard disk drive in your
camcorder.
Delete unnecessary

images.
 Battery power is low.

The temperature of your

camcorder is getting
higher or extremely
high. Turn off your
camcorder and leave
it for a while in a cool
place.
The temperature of

your camcorder is
extremely low. Make the
camcorder warm.
When the indicator

flashes slowly, free space
for recording images are
running out.
No "Memory Stick PRO

Duo" is inserted (p. 12).
When the indicator

flashes quickly, there are
not enough free space
for recording images.
Delete unnecessary
images, or format the
"Memory Stick PRO
Duo" after storing the
images on other media
(p. 23).
The Image Database File

is damaged.
The "Memory Stick

PRO Duo" is damaged.
The "Memory Stick

PRO Duo" is not
formatted correctly.
An incompatible

"Memory Stick PRO
Duo" is inserted.