General Information; Hazard Statements; Receiving The Product; Inspecting The Product - Grundfos Digital timer kit Installation And Operating Instructions Manual

UP_DigitalTimerKit_w_LineCordLid.book Page 4 Wednesday, October 31, 2018 5:49 PM

2. General information

2.1 Hazard statements

The symbols and hazard statements below may
appear in Grundfos installation and operating
instructions, safety instructions and service
instructions.
DANGER
Indicates a hazardous situation which,
if not avoided, will result in death or
serious personal injury.
WARNING
Indicates a hazardous situation which,
if not avoided, could result in death or
serious personal injury.
CAUTION
Indicates a hazardous situation which,
if not avoided, could result in minor or
moderate personal injury.
The hazard statements are structured in the
following way:
SIGNAL WORD
Description of hazard
Consequence of ignoring the warning.
- Action to avoid the hazard.
4
2.2 Notes
The symbols and notes below may appear in
Grundfos installation and operating instructions,
safety instructions and service instructions.
Observe these instructions for
explosion-proof products.
A blue or grey circle with a white
graphical symbol indicates that an
action must be taken.
A red or grey circle with a diagonal
bar, possibly with a black graphical
symbol, indicates that an action must
not be taken or must be stopped.
If these instructions are not observed,
it may result in malfunction or damage
to the equipment.
Tips and advice that make the work
easier.

3. Receiving the product

3.1 Inspecting the product

Check that the product received is in
accordance with the order.
Check that the voltage and frequency of the
product match the voltage and frequency of the
installation site.
Examine the product to make sure no damage
has occurred during shipment.
3.2 Scope of delivery
The box contains the following items:
• one 24-hour timer
• one line cord
• one replacement terminal box cover
• installation and operating instructions.