Sony Handycam DCR-PC1000E Operating Manual page 10

Step2:Charging the battery pack (Continued)
To charge the battery pack using the
AC Adaptor
Slide the POWER switch up to (CHG)OFF.
Then connect the AC Adaptor directly to
the DC IN jack on the camcorder.
DC IN jack
DC plug
Facing the  mark
to the LCD screen.
To the wall socket
Mains lead
To remove your camcorder from the
Handycam Station
Turn off the power, then remove the
camcorder from the Handycam Station
holding both your camcorder and the
Handycam Station.
10
To remove the battery pack
Slide the POWER switch up to (CHG)OFF.
Then open the battery cover to remove the
battery pack.
POWER
switch
When storing the battery pack
Fully discharge the battery before storing it
for an extended period (p. 110).
To use an outside power source
AC Adaptor
You can operate your camcorder using the
power from the wall socket by making the
same connections as you do when charging
the battery pack. The battery pack will not
lose its charge in this case.