Horizon Fitness CANTLEVER 700 Installation Instructions Manual page 9

Installation Instructions Kemlan Power Flue Horizon Gas Fireplaces
THREADED ROD
EYELET
• Eyelets on the unit are supplied for attaching a turn buckle system, 6-
• Once hooks have been attached to the eyelets the turn buckle can then
• Tighten the turn buckle until both the top and bottom glass runners are
• Removable glass panel can now be placed in position allowing an even
28/02/2019
8mm threaded rod is required with a nut and washer either side of a
sufficient supporting roof member. Alternatively, a stainless steel wire
with a minimum 1mm diameter or heavier and a minimum break load of
130kg can also be used.
be simply wound up to take the tension.
parallel.
gap between glass and underside of channel.
MAKE SURE THESE
PLANES ARE PARALLEL,
AND MAKE SURE ALL
CORNERS ARE SQUARE
Ver. 25
DRILL THROUGH THE
BEAM , RAFTER OR
FRAMING IF REQUIRED
AND PUSH THROUGH
THE THREADED ROD.
9