D-Link EXO Series User Manual page 65

Section 3 - Configuration
Advanced Settings... - Address Autoconfiguration Settings
Enable Automatic
Enable or disable the Automatic IPv6 Address Assignment
IPv6 Address
feature.
Assignment
Enable Automatic
Enable or disable DHCP-PD for other IPv6 routers connected
DHCP-PD in LAN
to the LAN interface.
Autoconfiguration Select SLAAC+RDNSS, SLAAC+Stateless DHCP, or Stateful
Type DHCPv6.
If you selected SLAAC+RDNSS or SLAAC+Stateless DHCP as the Autoconfiguration Type:
Router
Enter the router advertisement lifetime (in minutes).
Advertisement
Lifetime
IPv6 Address Enter the ending IPv6 address for the DHCP server's IPv6
Range (End) assignment.
If you selected Stateful DHCPv6 as the Autoconfiguration Type:
IPv6 Address
Enter the starting IPv6 address for the DHCP server's IPv6
Range (Start)
assignment.
IPv6 Address
Enter the ending IPv6 address for the DHCP server's IPv6
Range (End)
assignment.
D-Link EXO Series Router User Manual 59