Step 3 Adjusting The Lcd Screen And The Viewfinder; Adjusting The Angle And The Brightness Of The Lcd Screen - Sony Handycam DCR-DVD301 Operating Instructions Manual

Step 3 Adjusting the LCD screen and the viewfinder

Adjusting the angle and the brightness of the LCD screen

Adjust the brightness and the angle of the LCD screen properly in your sight.
LCD BACKLIGHT
button
OPEN button
1
2
To adjust the brightness of the LCD display
1
2
3
20
180°
Open the LCD screen while pressing OPEN.
Adjust the direction of the LCD screen to the desired position.
When you adjust the angle of the LCD screen, make sure if the LCD screen is
opened up to a full 90 degrees.
You can turn the LCD screen over and then fold it back to the camcorder body
with the LCD screen facing out as shown below.
Turn the power on by pressing the POWER button for a few seconds.
Press SETUP.
The SETUP display appears.
MANUAL SET
PROGRAM AE
P EFFECT
D EFFECT
WHT BAL
AUTO SHTR
[ SETUP ] : END
Use the multi-selector to select
Refer to page 23 to see how to use the multi-selector.
LCD / VF SET
LCD BRIGHT
LCD B. L.
LCD COLOR
VF B. L.
RETURN
[ SETUP ] : END
2
90°
90°
1
b
(LCD/VF SET).
SETUP button