Sony Handycam DCR-DVD301 Operating Instructions Manual page 116

Changing the SETUP display
Icon/Item
OTHERS
DATA CODE
(operation on
the Remote
Commander)
AREA SET
DST SET
BEEP
COMMANDER
DISPLAY
REC LAMP
116
Option Meaning
z DATE/CAM To change the display in the order of the date
and time t the camera data t the display each
time pressing DATA CODE (page 59).
DATE Press DATA CODE on the Remote Commander
to display date and time during playback.
— To set your local area.
z OFF To cancel the use of daylight savings time.
ON To use the daylight savings time.
z MELODY To output a melody when you start/stop
recording or when an unusual condition occurs
on your camcorder.
NORMAL To output the beep instead of the melody.
OFF To cancel the melody, beep sound and shutter
sound.
z ON To activate the Remote Commander supplied
with your camcorder.
OFF To deactivate the Remote Commander to avoid
erroneous remote control operation caused by
other equipments' remote control.
z LCD To show the display on the LCD screen and in
the viewfinder.
V-OUT/LCD To show the display also on the TV screen.
z ON To light up the camera recording lamp on the
front of your camcorder during recording.
OFF To turn the camera recording lamp off so that
the subject is not aware of the recording.
Mode dial
Play/Edit
Movie
Still
Play/Edit
Movie
Still
Play/Edit
Movie
Still
Play/Edit
Movie
Still
Play/Edit
Movie
Still
Play/Edit
Still
Movie