Hotel Mode - Panasonic TH-42LRU20 Service Manual

TH-42LRU20
5.3.

Hotel mode

1. Purpose
Restrict a function for hotels.
2. To display Hotel mode setup menu
Press [MENU], [G], [Y] and [0] buttons on the remote con-
trol by turns.
Then, the Hotel mode setup menu is displayed.
3. Setting for each items
Select item by [UP]/[DOWN] button on the remote control
and change the setting by [LEFT]/[RIGHT] button on the
remote control. After the setting, select "Save" and press
[OK] button on the remote control to store.
4. To exit the Hotel mode setup menu
Disconnect the AC cord from wall outlet, or press and
hold the [POWER] button at right side on the main unit for
10 seconds or more.
5. Explain the Hotel mode setup menu
item
Mode Select hotel mode off/on
TA Ctrl Sets TA (Terminal Adaptor) status. (Internal/
External/Off)
Internal: Use Internal TA
External: Use External TA
Initial input Selects Input when the TV is turned on.
Does not operate when input from TA to the
TV is prohibited.
(-/RF/HDMI 1-3/Component/Video1-2/PC)
Initial channel Sets the channel at power-on.
Initial volume Sets the volume level at power-on. (0-100)
Does not operate when control from TA to
the TV is prohibited.
Max.volume Sets the maximum volume level. (0-100)
OSD Ctrl Limits the OSD display. (Off/Pattern1)
Pattern 1: "Recall" and "Shut-off notification"
messages are not displayed at power-on.
Also displayed when "Pattern 1" is specified
as the display command from TA.
Button lock Limits the TV panel button operation. (Off/
Pattern1/All)
All: All buttons are not available.
Pattern 1: Only INPUT and POWER buttons
are available.
Power ctrl Sets the screen condition when the AC
power is switched on. (Off/On)
Off: Starts up in last screen.
ON: Starts up in screen On.
Remote Switches Operation guide according to
remote control. (Panasonic/Others)
CC reset Sets CC setting status. (Off/On)
Off: Saves the last settings.
On: Resets all CC settings to defaults.
Lock reset Sets Lock setting status. (Off/On)
Off: Saves the last settings.
On: Resets all Lock settings to defaults.
CC Priority CC Contents priority setting. (708/608)
Note: This item was introduced by running
change.
10
Function