Advertisement
Quick Links
WIRELESS MADE SIMPLE
OEM COMPACT HANDHELD TRANSMITTER DATA GUIDE
DESCRIPTION
The
Linx
CMD-HHCP-xxx-***
Command Unit is ideal for general-purpose
remote control and command applications.
This unit has been pre-certified for FCC Part
15, Industry Canada, and CE (433MHz only)
compliance, reducing development costs and
time to market. Available in 315, 418
(standard), or 433.92MHz, this compact
remote has a transmission range of up to
1,000 feet when combined with the LR Series
receiver. The transmitter unit can be
configured with 1 to 8 buttons and the keypad
and labeling can be modified to meet specific
OEM customer requirements. Selectable
addressing provides security and allows the
creation of up to 1024 distinct transmitter-
receiver relationships. The address can be
easily changed via an externally accessible
DIP switch. The transmission can be
decoded using a matching Linx Function
Module, KH Series receiver/decoder, or a
Linx LC or LR Series receiver paired with a
decoder IC or microcontroller. The unit uses
a single 3V CR-2032 lithium button cell.
FEATURES
FCC, Canada, and CE pre-certified
1 to 8 buttons
Small package
Customizable keypad
APPLICATIONS INCLUDE
General Remote Control
Keyless Entry
Garage / Gate Openers
Lighting Control
Call Systems
Home / Industrial Automation
Wire Elimination
Remote
R 0.2"
2.00"
1.35"
1.62"
0.20"
Figure 1: Physical Dimensions
OEM Configurations
With a one-time NRE and minimum
order, Linx can configure the keypad
and label areas to meet your specific
requirements. Contact Linx for details.
ORDERING INFORMATION
PART NUMBER
DESCRIPTION
CMD-HHCP-xxx-***
8-Button Handheld Transmitter
EVAL-xxx-HHCP
HHCP Evaluation System
xxx = 315, 418 (Standard), 433.92 MHz
*** = Color Leave blank for standard Black
WHT = White
CGY= Gray
CRE = Red
CPU = Purple
Revised 4/29/05
2.81"
0.60"
CBL = Blue
Advertisement
Related Manuals for Linx CMD-HHCP series
Summary of Contents for Linx CMD-HHCP series
- Page 1 DIP switch. The transmission can be decoded using a matching Linx Function Module, KH Series receiver/decoder, or a Linx LC or LR Series receiver paired with a decoder IC or microcontroller. The unit uses a single 3V CR-2032 lithium button cell.
-
Page 2: Electrical Specifications
– describes in detail how to set the address to match any of the receivers offered Notes by Linx. This note can be found in the Support section of the Linx web site, 1. Characterized, but not tested. www.linxtechnologies.com. CMD-HHCP BUTTON ASSIGNMENTS... - Page 3 COMPLIANCE REQUIREMENTS It is important to understand that only one transmitter at a time can be activated The CMD-HHCP-xxx has been pre-certified by Linx Technologies for FCC Part within a reception area. While the transmitted signal consists of encoded digital 15 and Industry Canada RSP-100 compliance.
-
Page 4: Typical Applications
Wall Module. These items are also pre-certified and can be immediately included in a product. The other options are to use one of the Linx receiver modules. The signal sent by the Compact Hand Held transmitter can be received by the LC Series receiver module or, for longer range, the LR Series receiver module. - Page 5 Data Sheet is believed to be accurate as of the time of publication. Specifications are based on representative lot samples. Values may vary from lot to lot and are not guaranteed. Linx Technologies makes no guarantee, warranty, or representation regarding the suitability or legality of any product for use in a specific application.