Table of Contents
Advertisement
Playing Two Voices Simultaneously
LAYER (DUAL) VOICE - Layer, or dual, refers to an additional voice that is tone mixed with the already
selected Upper (main) instrument voice. The selected layer voice will be heard with the Upper (Main)
voice when the layer feature is engaged.
Combining Two Instrument Voices
1. Press the LAYER Button, it's LED indicator will turn on. The LCD Display will appear
LAYER
as shown below. Now when the piano keys are played you should hear both strings
and the previously selected instrument voice.
2. You may select a different Layer instrument voice in the same manner as listed on
SCREEN
the previous page. The procedure is shown again below. Press the Sound Group
LEFT
RIGHT
Button twice.
Use the SCREEN RIGHT, SCREEN LEFT buttons to page through the voice groups
(or you may simply use the Value Buttons + and - to cycle through the available
instrument voices).
3. Use the CURSOR buttons to move the highlighted area to the voice you would like
CURSER
to select.
4. Press the ENTER button to engage your selected voice. The display screen will show
ENTER
your newly selected voice.
To Disengage The Layer Mode
To disengage the LAYER mode simply press the LAYER Button, it's LED indicator will
LAYER
turn off.
You may return to default or power up settings by simply pressing the GRAND
GRAND PIANO
PIANO Button (red). The piano's settings will reset to the initial full 88 note piano
with the Grand Piano Voice Selected.
The Grand Piano Button is located to the right of the LCD display screen.
8
LAYER
49 : Strings
1 : Big Band
NC
A1
= 100
Q U I C K S T A R T G U I D E
Advertisement
Table of Contents
