FFC LAF5416 Operator And Parts Manual
  1. Manuals
  2. Brands
  3. FFC Manuals
  4. Planer
  5. LAF5416
  6. Operator and parts manual

FFC LAF5416 Operator And Parts Manual

High flow cold planer
Hide thumbs Also See for LAF5416:
Table of Contents

Advertisement

Quick Links

See also: Manual
OPERATOR'S AND PARTS MANUAL
HIGH FLOW COLD PLANER
SERIAL NUMBER: ___________________
MODEL NUMBER: ___________________
800-456-7100 I www.paladinattachments.com
Manual Number: MR25664
Models: LAF5416, LAF5418, LAF5420,
Rev. 2
2800 N. Zeeb Rd., Dexter, MI. 48130, United States of America Copyright ©
LAF5424, LAF5430 & LAF5436
1/9/14

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LAF5416 and is the answer not in the manual?

Questions and answers

Related Manuals for FFC LAF5416

Summary of Contents for FFC LAF5416

  • Page 1 OPERATOR’S AND PARTS MANUAL HIGH FLOW COLD PLANER SERIAL NUMBER: ___________________ Manual Number: MR25664 Models: LAF5416, LAF5418, LAF5420, MODEL NUMBER: ___________________ LAF5424, LAF5430 & LAF5436 Rev. 2 800-456-7100 I www.paladinattachments.com 2800 N. Zeeb Rd., Dexter, MI. 48130, United States of America Copyright ©...
  • Page 2 NOTES...

  • Page 3: Table Of Contents

    TABLE OF CONTENTS PREFACE ........................2 OWNER AND OPERATOR SAFETY INFORMATION SAFETY STATEMENTS ................. 3 GENERAL SAFETY PRECAUTIONS ............3-6 SAFETY SIGNS & DECALS ................7-8 INSTALLATION & SET-UP ..................9-11 OPERATION ......................12 MAINTENANCE ....................... 13-17 PARTS........................18-33 3-LINE ASSEMBLY ..................18-19 5-LINE ASSEMBLY ..................20-21 CHASSIS ASSEMBLY ..................22-23 ROLLER ASSEMBLY ..................24-25...

  • Page 4: Preface

    PREFACE GENERAL INFORMATION This product was carefully designed and manufactured to give you many years of dependable service. Only minor maintenance (such as cleaning and lubricating) is required to keep it in top working condition. Be sure to observe all maintenance procedures and safety precautions in this manual and on any safety decals located on the product and on any equipment on which the attachment is mounted.

  • Page 5: Safety Statements

    SAFETY STATEMENTS THIS SYMBOL BY ITSELF OR WITH A WARNING WORD THROUGHOUT MANUAL IS USED TO CALL YOUR ATTENTION TO INSTRUCTIONS INVOLVING YOUR PERSONAL SAFETY OR THE SAFETY OF OTHERS. FAILURE TO FOLLOW THESE INSTRUCTIONS CAN RESULT IN INJURY OR DEATH. DANGER! THIS SIGNAL WORD IS USED WHERE SERIOUS INJURY OR DEATH WILL RESULT IF THE INSTRUCTIONS ARE NOT FOLLOWED PROPERLY.
  • Page 6 GENERAL SAFETY PRECAUTIONS GENERAL SAFETY PRECAUTIONS WARNING! PROTECT AGAINST FLYING DEBRIS Always wear proper safety glasses, goggles, or a face shield when driving pins in or WARNING! PROTECT AGAINST FLYING DEBRIS out, or when any operation causes dust, flying debris, or any other hazardous mate- Always wear proper safety glasses, goggles or a face shield when driving pins in or rial.
  • Page 7 GENERAL SAFETY PRECAUTIONS WARNING! DO NOT MODIFY MACHINE OR ATTACHMENTS Modifications may weaken the integrity of the attachment and may impair the function, safety, life, and performance of the attachment. When making repairs, use only the manufacturer’s genuine parts, following authorized instructions. Other parts may be substandard in fit and quality.
  • Page 8 GENERAL SAFETY PRECAUTIONS WARNING! KNOW WHERE UTILITIES ARE Observe overhead electrical and other utility lines. Be sure equipment will clear them. When digging, call your local utilities for location of buried utility lines, gas, water, and sewer, as well as any other hazard you may encounter. WARNING! EXPOSURE TO RESPIRABLE CRYSTALLINE SILICA DUST ALONG WITH OTHER HAZARDOUS DUSTS MAY CAUSE SERIOUS OR FATAL RESPIRATORY DISEASE.

  • Page 9: Safety Signs & Decals

    SAFETY SIGN & DECAL LOCATIONS The diagram on this page shows the location of the decals used on the FFC Cold Planer. The decals are identified by their part numbers, with reductions of the actual decals located on the following page. Use this information to order replacements for lost or damaged decals. Be sure to read all decals before operating the attachment.

  • Page 10: Safety Signs & Decals

    SAFETY SIGNS & DECALS PART #50-0721 WARNING! CRUSH HAZARD PART #41043 WARNING! HAZARDOUS DUST PART #50-10017 WARNING! READ MANUAL PART #50-0737 WARNING! PINCH POINT PART #RDL3100 PART #50-0724 WARNING! STAND CLEAR WARNING! HIGH PRESSURE FLUID PART #RDL3159 CAUTION! FLYING DEBRIS PART #RDL3179 LIFT POINT MR25664...

  • Page 11: Installation & Set-Up

    INSTALLATION & SET-UP WARNING! READ MANUAL PRIOR TO INSTALLATION Improper installation, operation, or maintenance of this equipment could result in serious injury or death. Operators and maintenance personnel should read this manual, as well as all manuals related to this equipment and the prime mover thoroughly before beginning installation, operation, or maintenance.
  • Page 12 INSTALLATION & SET-UP READ AND UNDERSTAND ALL SAFETY STATEMENTS Read all safety decals and safety statements in all manuals before beginning any Cold Planer hydraulic connection. Know and obey all OSHA regulations, local laws, and other professional guidelines for your operation. Know and follow good work practices when assembling, maintaining, repairing, mounting, removing, or operating this equipment.

  • Page 13: Installation & Set-Up

    INSTALLATION & SET-UP SAFETY FIRST! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS BEFORE BEGINNING ANY COLD PLANER SETUP! From the operator’s position: • The left switch controls the Planer Tilt. • The middle switch controls the Planer Sideshift. • The right switch controls the Planer Depth. MR25664...

  • Page 14: Operation

    OPERATION Starting a Cut: To begin a cut, adjust the depth cylinders to the desired depth with the planer slightly above the ground. Engage the hydraulic system to start the drum. Lower the planer bringing the front wheels onto the ground. Continue lowering the planer until the rear wheels are on the ground and the drum is milling the material.

  • Page 15: Maintenance

    MAINTENANCE GENERAL INFORMATION Regular maintenance is the key to long equipment life and safe operation. Maintenance requirements have been reduced to the absolute minimum. However, it is very important that these maintenance functions be performed as described below. WARNING! Failure to obey the following procedures could result in death or serious injury. •...
  • Page 16 MAINTENANCE Lubrication Points Grease Fittings: Weld Pivot, 3 Total Caster, 1 each, 4 Total Mounting, 4 Total ( 2 hidden behind mounting plate) Depth Guide, 2 Total NOTE: Lubricate all grease fittings with a NLGI #1 or 2 multipurpose grease or equivalent. NOTICE! Avoid excessive greasing.
  • Page 17 MAINTENANCE GENERAL INFORMATION Regular maintenance is the key to long equipment life and safe operation. Maintenance requirements have been reduced to the absolute minimum. However, it is very important that these maintenance functions be performed as described below. WARNING! Failure to obey the following procedures could result in death or serious injury. •...
  • Page 18 MAINTENANCE MAINTENANCE RECORD Use this log to record maintenance performed on the attachment. Maintenance Procedure Performed Date Comments Performed MR25664...

  • Page 19: Parts

    MAINTENANCE NOTICE! When replacing parts use only factory approved replacement parts. Manufacturer will not claim responsibility for use of unapproved parts or accessories and/or other damages as a result of their use. Park your prime mover on a level surface with this product properly attached. Place your prime mover’s transmission in “Park”...

  • Page 20: 3-Line Assembly

    3-LINE ASSEMBLY 16 to 24 inch unit shown Item Part Description 1. 03-10013 Hose, .5 x 56, 8FF45-12FF, 100R2 2. 03-10014 Hose, .75 x 52, 12FF-12FF45 3. 03-10015 Manifold, 3-Line 4. 03-10029 Hose, .25 x 42.5, 4FF-4FF45, 100R2 (16-24 in) 5.
  • Page 21 3-LINE ASSEMBLY Item Part Description 6. 03-10031 Hose, .25 x 19, 4FF-4FF45, 100R2 7. 03-10032 Hose, .25 x 29, 4FF-4FF45, 100R2 (16-24 in) 8. 03-10033 Hose, .25 x 61, 4FF-4FF45, 100R2 (16-24 in) 03-10033 Hose, .25 x 61, 4FF-4FF45, 100R2 (30-36 in) 9.

  • Page 22: 5-Line Assembly

    5-LINE ASSEMBLY 16 to 24 inch unit shown Item Part Description 1. 03-10016 Manifold, 5-Line 2. 03-10027 Hose, .38 x 87, 6FF-10MB, 100R2 3. 03-10029 Hose, .25 x 42.5, 4FF-4FF45, 100R2 (16-24 in) 4. 03-10030 Hose, .25 x 47, 4FF-4FF45, 100R2 (16-24 in) 5.
  • Page 23 5-LINE ASSEMBLY Item Part Description 9. 03-10122 Motor, 2.48 CID, Eaton 10. 03-10137 Elbow, 90º, 6MB-8MF 11. 03-2115 Elbow, 45º, 6MB-6MF 12. 03-3400 Fitting, 4MF-6MB 13. 03-3734 Elbow, 90º, 4MF-6MB 14. 03-3787 Elbow, 90º, 12FF-12MB 15. 03-4368 Tee, 12MF-12MF-12FF 16. 03-5242 Hose Cradle 17.

  • Page 24: Chassis Assembly

    CHASSIS ASSEMBLY MR25664...
  • Page 25 CHASSIS ASSEMBLY Item Part Description 1. 07-3112 Fitting, Zerk, 1/4-28, Self-Tap 2. LAF9307 Latch, Lid 3. LAF9322 Weld, Wheel 4. LAF9324 Pin, Dual, Snap Ring, 1-5.907 5. LAF9325 Pin, Dual, Snap Ring 6. LAF9336 Weld, Chassis,16 inch 7. LAF9337 Weld, Chassis,18 inch 8.

  • Page 26: Roller Assembly

    ROLLER ASSEMBLY MR25664...
  • Page 27 ROLLER ASSEMBLY Item Part Description 1. LAF9310 Bearing, DeadShaft 2. LAF9316 Weld, DeadShaft 3. LAF9348 Bearing, Guard 4. LAF9352 Weld, Pick Pattern (16 inch) 5. LAF9353 Weld, Pick Pattern (18 inch) 6. LAF9354 Weld, Pick Pattern (20 inch) 7. LAF9355 Weld, Pick Pattern (24 inch) 8.

  • Page 28: Side Shift/Pivot Assembly

    SIDE SHIFT/PIVOT ASSEMBLY 12 13 14 15 16 6 7 8 9 10 MR25664...
  • Page 29 SIDE SHIFT/PIVOT ASSEMBLY Item Part Description 1. 07-3112 Fitting, Zerk, 1/4-28 2. 07-5809 Fitting, Zerk, 45º, 1/4-28 3. LAF9308 Rod, 2 x 2.31 4. LAF9358 Plate, Tilt Retainer 5. LAF9366 Weld, Pivot (16ft) 6. LAF9367 Weld, Pivot (18 inch) 7. LAF9368 Weld, Pivot (20 inch) 8.
  • Page 30 4 14 LABELS & DECALS 4 14 4 14 MR25664...

  • Page 31: Labels & Decals

    Label, Warning, Crush Hazard 6. 50-0724 Label, Warning, High Pressure Fluid Hazard 7. 50-0737 Label, Warning, Pinch Point Hazard 8. 50-0856 Label, Serial Number, FFC 9. 50-10017 Label, Warning, Avoid Serious Injury 10. LAF8231 Non-Skid Tape 11. RDL3100 Label, Warning, Flying Objects 12.

  • Page 32: Mounting Assembly

    MOUNTING ASSEMBLY Item Part Description 1. 13-50392 Rod, 2 X 47.25 2. 13-50445 Tube, Spacer, 2.75 x 2.063 x 6 (36 inch only) 3. LAF9319-0022 Weld, Plate, Universal (12 to 24 inches 13-50434 Weld, Plate, Universal (30 to 36 inches 5.

  • Page 33: Quick Disconnects

    QUICK DISCONNECT KITS 3-LINE Female Case Drain 11-5441-8 Item Part Description 1. LAF4455 QD, Case Drain 2. P272670 QD, 8FF, Female, 12FB 3. P272671 QD, 8FF, Male, 12FB Male Case Drain 11-5441-10 Item Part Description 1. LAF4461 QD, Case Drain 2.
  • Page 34 QUICK DISCONNECT KIT 5-LINE Male Case Drain 11-5441-12 Item Part Description 1. LAF4461 QD, Case Drain 2. LAF4747 QD, 12FF, Male, 12FB, ISO 3. LAF4748 QD, 12FF, Female, 12FB, ISO MR25664...
  • Page 35 QUICK DISCONNECT KITS 5-LINE with Adapter Fittings 11-5442-6 Item Part Description 1. 03-10143 QD, 6FF, Female, 6FB 2. 03-10144 QD, 6FF, Male, 6FB 3. 03-4880 Fitting, 8MB-10FB 4. LAF4203 Fitting, 6MB-8FB 11-5442-12 Item Part Description 1. 03-4618 Fitting, 12FB-12MB 2. P272670 QD, 8FF, Female, 12FB, ISO 3.

  • Page 36: Specifications

    PRIME MOVER SPECIFICATIONS IMPORTANT Exceeding any of the maximum recommended prime mover specifications CAN result in damage to this product and WILL void all FFC warranties. DESCRIPTION SPECIFICATIONS Weight of Prime Mover without Cold Planer 11,000 lbs. maximum Operating Capacity of Prime Mover's Loader 4,500 lbs.
  • Page 37 MR25664...

  • Page 38: Product

    Limited Warranty Except for the Excluded Products as described below, all new products are warranted to be free from defects in material and/or workmanship during the Warranty Period, in accordance with and subject to the terms and conditions of this Limited Warranty. Excluded Products.

This manual is also suitable for:

Laf5418Laf5424Laf5420Laf5436Laf5430

Table of Contents