Sony Handycam Vision CCD-TRV66E Operating Instructions Manual page 71

Changing the MENU settings
Icon/item Mode
HiFi SOUND r STEREO
EDIT r OFF
TBC r ON
TBC stands for "Time Base Corrector".
DNR r ON
DNR stands for "Digital Noise Reduction".
NTSC PB
r ON PAL TV
LCD B. L.
r BRT NORMAL
LCD COLOUR
Note on NTSC PB
When you play back a tape on a Multi System TV, select the best mode while viewing the picture on
the TV.
In more than 5 minutes after removing the power source
The "WIND" "COMMANDER" "EDIT" and "HiFi SOUND" items are returned to their factory
settings.
The other menu items are held in memory even when the battery is removed, as long as the lithium
battery is installed.
Notes on LCD B.L.
•When you select "BRIGHT", battery life is reduced by about 10 percent during recording.
•When you use power sources other than the battery pack, "BRIGHT" is automatically selected.
Meaning
To play back a stereo tape or dual sound track tape
1 To play back a monaural tape or dual sound track
tape with main sound
2 To play back a dual sound track tape with sub
sound
—
ON To minimize picture deterioration when editing
To correct jitter
OFF To not correct jitter. Set TBC to OFF when playing
back a tape on which you have dubbed over and
recorded the signal of a TV game or similar
machine.
To reduce picture noise
OFF To reduce a conspicuous afterimage when the
picture has a lot of movement
To play back a tape recorded on your camcorder on
a PAL system TV
NTSC 4.43 To play back a tape recorded in the NTSC colour
system on a TV with the NTSC 4.43 mode
To set the brightness on the LCD screen normal
BRIGHT To brighten the LCD screen
To adjust the colour on the LCD screen, turn and
press the SEL/PUSH EXEC dial
To lighten To darken
POWER
switch
VTR
VTR
VTR
VTR
VTR
VTR
CAMERA
VTR
CAMERA
71