Self-Check Procedure - Panasonic TH-103PF9UK Technical Manual

How to Enter the Self-check Screen
1. Self-check is used to automatically check the
communication status of the IIC bus lines.
2. To get into the Self-check mode, press the volume
down button located on the side of the set.
3. At the same time press the OFF-TIMER button on the
remote control. An OSD resembling the picture on the
right shows up on the screen. If a CCU port is checked
and found to be incorrect or not located, then "--" (two
dashes) appear in place of "OK".
4. "01" in the "PTCT" line represents the number of blinks
emitted by the Power LED after a shutdown (SOS).
5. "H09" in the "PTCT" line is the error code.
Note: The code displayed in the "PTCT" line is present
in the first "Self-check Screen" activation only.
To exit the Self-check screen,
Switch off the main power button.
Self-check Screen
54