7.18. Remove the C3-Board
1. Remove the DD-Heat-sink fastening screws (×8
2. Remove the DD-Heat-sink (×4).
3. Disconnect the flexible cables (CB12, CB13, CB14 and
CB15).
4. Disconnect the flexible cable (C36).
5. Disconnect the connectors (C33 and C35).
6. Remove the screws (×4
7.19. Remove the Front bracket
1. Unlock the cable clampers to free the cable.
2. Disconnect the connectors (A9, A11, A51 and A53). (See
section 7.7.)
3. Remove the screws (×2
Front bracket.
).
) and remove the C3-Board.
, ×2
) and remove the
7.20. Remove the G-Board
1. Remove the Front bracket. (See section 7.19.)
2. Remove the screws (×2
3. Remove the screws (×3
4. Remove the Front shield case front.
5. Remove the screws (×2
6. Remone the Front shield top.
7. Remove the screws (×2
8. Disconnect the connector (G51) and remove the G-
Board.
9. Disconnect the connector (GH11) and remove the GH-
Board.
10. Remove the screw (×1
22
).
).
).
).
).