Table of Contents
Advertisement
Adjustment Method
Sub-Contrast/White Balance Adjustment
Instrument Name
1.
Remote controller
2.
LCD WB meter (Minolta CS-1000A equivalent)
3.
Comunication jig
4.
Computer for external control
Subcontrast adjustment
1.
Receive PAL colour bar (100% white) RF signal.
2.
Enter "Contrast" adj. In SERVICE mode.
3.
Start adjusting by using Yellow Key.
4.
If the adjustment finished normally, the letter of Contrast will change from red
to black
White Balance adjustment
1.
Procedure basically performs checking using the production software and
make automatic adjustment using external computer.
2.
It adjusts in the mode of : Colour balance Normal as follows.
LMD70
WHITE
Normal
x: 0,2890 ± 0,001
y: 0,3020 ± 0,001
GRAY
Normal
x: 0,2860 ± 0,001
y: 0,3050 ± 0,001
Procedure
Viewing Mode Dynamic
WHITE
GRAY
Connect to
LMD70F
Normal
x: 0,2850 ± 0,001
y: 0,2930 ± 0,001
Normal
x: 0,2850 ± 0,001
y: 0,2930 ± 0,001
15
Remarks
Correlation can be also taken by
CA-210 or equivalent
Remarks
Let the panel standfor more than 3
hours at more than 20 °C.
Basically perform adjustment in the
ambient environment of room
temperature more than 20 °C.
The aging time is more than20 min
at above room temperature.
Applied signal
100% full colour bar
0,7V p-p white peak
87.5% modulation
100% WHITE
50% GRAY
Hide quick links:
Advertisement
Table of Contents
