Plasma Panel Replacement Method; Remove The; Remove The Fan; Remove The Tuner Cover - Panasonic TH-42PV60A Service Manual

TH-42PV60A / TH-42PV60H / TH-42PV60M / TH-42PV60MT

6 Plasma panel replacement method

6.1. Remove the Back cover
1. See Service Hint (Section 5)
6.2.

Remove the fan

1. Disconnect the relay couplers.
2. Remove the screws (×3
6.3.

Remove the tuner cover

1. Remove the screws (×7
2. Remove the tuner cover.
) and remove the fans.
, ×4 , ×2 , ×2 ).
6.4.

Remove the P-Board

Caution:
To remove P.C.B. wait 1 minute after power was off for
discharge from electrolysis capacitors.
1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (P2, P5, P9, P10, P11, P12, P23,
and P25).
3. Remove the screws (×5
Board.
6.5.

Remove the PA-Board

1. Unlock the cable clampers to free the cable.
2. Disconnect the couplers (PA2, PA5, PA10, PA31, PA32,
PA33, PA34 and PA40).
3. Disconnect the flexible cable (PA20).
4. Remove the screws (×4
5. Remove the PA-Board.
10
, ×1 ) and remove the P-
) and remove the earth cable.