Advertisement
OPERATION
Preparation
Your appliance is provided with a dust bag. The
appliance is ready for use when all parts are
installed together.
1__
I nsert the flexible hose
contact into the inlet on the main body of the
appliance until it latches in.
Note
To remove the flexible hose
■
release buttons buttons on the flexible hose
adapter
and then pull out the hose.
D
2__
I nsert the end of the flexible hose to the metal
telescopic tube
.
C
Note
To adjust the length of the metal telescopic
■
tube
, push and hold the height setting
C
switch
and slide the tube out or in as
E
required. Release the height setting switch
and make sure that the tube clicks into place.
3__
I nsert the multi-floor brush or crevice tool into
the lower end of the metal telescopic tube
________________________________________
with the flexible
Q
press the side
Q
E
.
C
Note
Install all snap-on elements by pushing and
■
rotating to each other and remove them by
pulling and rotating.
Usage_of_multi-floor_brush_in_two_
different_positions
Brush part shall be out while cleaning hard
surfaces and parquet floors.
Brush part shall be inside while cleaning carpets
and rugs.
Crevice_tool
This accessory is suitable for removing dust
from bookcases, curtains, window frames and
upholstered furniture.
ENGLISH
7
Advertisement
