What’s in the box? Indoor Rotating Camera Quick Start Guide UK Power Adapter Warranty Card Micro USB Cable Wall Screws & Reset Pin 1. Connect the camera to the mains using the USB cable and power adapter provided 2. The camera will make a repeating chime noise once it is ready to connect Please note: it is important that the camera is plugged directly into a mains power supply and not an extension cable...
If your camera is not making this chime noise, please go to Page 7 to reset the camera Your WiFi Password Step 1 Step 2 On the ipixo app, select Click Wireless Installation the + icon on the top right corner...
Page 7
Step 3 Step 4 This will bring up your WIFI Ensure your phone is at router. maximum volume, the camera will use sound rays to connect. Enter your WiFi password, You will hear a second chime click Apply noise once connected Step 5 Step 6 Your camera will appear...
If you are having trouble connecting the camera, you may need to do a reset. Step 1 Step 2 minus icon Go to the camera section on Then click the ipixo app to delete the of the camera you want to Click Edit camera. delete. Step 3...
Page 9
5. My camera is not connecting over 3G/4G You will need to check two settings: Firstly, ensure mobile data is turned on, on your smartphone Secondly, swipe right on the iPixo app, click Network limitations and ensure the toggle is off.
Page 10
Additional Information To get the best out of your Camera, please visit: https:// www.ipixo.com/product-downloads If you’re still struggling with setup and if you require any help to make the most of your camera please contact our customer services team. support@ipixo.com...
Need help?
Do you have a question about the WIP31 and is the answer not in the manual?
Questions and answers