Sony BDP-S1000ES Operating Instructions Manual page 56

Audio (HDMI)
Selects the signal type for the HDMI OUT
jack.
Auto
2ch PCM
b
Select "2ch PCM" when connecting a TV or an AV
amplifier (receiver) that does not support Dolby
Digital or DTS, otherwise noise or no sound may
result.
BD Audio Setting
Selects whether to mix or not mix interactive
audio and secondary audio (commentary)
when playing a BD that contains such audio.
Mix
Direct
b
PCM 96 kHz and PCM 192 kHz audio signals are
output as PCM 48 kHz audio signals when "BD
Audio Setting" is set to "Mix."
Audio ATT
Lowers the audio output level to prevent
sound distortion.
On
Off
b
"Audio ATT" does not affect the output from the
HDMI OUT jack, the DIGITAL OUT (OPTICAL/
COAXIAL) jack, and the PHONES jack.
56
Normally select this.
Outputs audio signals
according to the status of the
connected HDMI device.
Downmixes to 2-channel
Linear PCM signals before
outputting from the HDMI
OUT jack.
Outputs the audio obtained
by mixing the interactive
audio and secondary audio
to the primary audio.
Outputs the primary audio
only.
Enables Audio Attenuation.
Disables Audio Attenuation.
Dolby Digital
Selects the audio signals output when playing
Dolby Digital discs.
This setting affects the output from the
DIGITAL OUT (COAXIAL/OPTICAL)
jack.
Downmix
Converts to output Linear
PCM PCM signals. Select this
when connecting an audio
device without a built-in
Dolby Digital decoder.
Dolby Digital
Select this when connecting
an audio device with a built-
in Dolby Digital decoder.
DTS
Selects the audio signals output when playing
DTS discs. This setting affects the output
from the DIGITAL OUT (COAXIAL/
OPTICAL) jack.
Downmix
Converts to output Linear
PCM PCM signals. Select this
when connecting to an audio
device without a built-in
DTS decoder.
DTS Select this when connecting
to an audio device with a
built-in DTS decoder.
48kHz/96kHz PCM
Selects the maximum sampling frequency for
the PCM signals output from the DIGITAL
OUT (OPTICAL/COAXIAL) jack.
48kHz/16bit
Outputs audio signals of
96 kHz sampling as 48 kHz/
16 bit.
96kHz/24bit
Outputs audio signals of
96 kHz sampling as 96 kHz/
24 bit. However, the signals
will be output as 48 kHz/
16 bit if the source is copy-
protected.