Step 8: Setting Wireless Lan; Setting Wireless Lan (Automatic Registration (Wps)) - Sony BDP-S1000ES Operating Instructions Manual

Step 8: Setting Wireless
LAN
The network settings differ depending on
your connection method or the wireless LAN
router (access point). See "Step 4:
Connecting to the Network" on page 25 to
check the appropriate settings.
Setting wireless LAN
(Automatic registration (WPS))
Use the following procedure when you
connect the player to a Wi-Fi Protected
Setup-compatible wireless LAN router
(access point) with security set.
b
The wireless settings of the wireless LAN router
(access point) may change automatically if you use
the Wi-Fi Protected Setup function before adjusting
the settings of the wireless LAN router (access
point). In this case, you may need to change the
wireless settings of your PC accordingly. For
details, refer to the instruction manual supplied
with the wireless LAN router (access point).
1
Follow steps 1 and 2 of "Step 4:
Connecting to the Network" on page
25.
2
Press HOME.
3
Select
4
Select "Internet Settings" in "Network
Settings," and press ENTER.
5
Select "Start," and press ENTER.
6
Select "Wireless," and press ENTER.
7
Select "Automatic registration
(WPS)," and press ENTER.
8
Check the position of the WPS button
on the wireless LAN router (access
point) and how to press it.
The position of the WPS button and how
to press it differ depending on the
wireless LAN router (access point). For
details, refer to the instruction manual
supplied with the wireless LAN router
(access point).
32
(Setup) using </,.
9
Select "Start," and press ENTER.
10
Press and hold the WPS button on the
wireless LAN router (access point)
until the light on the wireless LAN
router (access point) starts to blink.
Press the WPS button within 2 minutes
after step 9.
The message "Access point registration
is complete." appears.
Example: when the wireless LAN router
(access point) has a WPS button
b
• When the player does not detect a wireless
LAN router (access point), repeat from step
9 after a while.
• In some cases, depending on the security of
the wireless LAN router (access point), it
may not be possible to use the Wi-Fi
Protected Setup function. In this case, follow
the on-screen instructions, and change the
settings of the wireless LAN router (access
point).
11
Select "Do not use," and press
ENTER.
If your Internet service provider has a
specific proxy server setting, select
"Use." For details, see "Network
Settings" on page 62.
12
Select "Perform" using M/m, and
press ENTER.
The network diagnostic starts.
Results are displayed after the player
finishes the network diagnostic.
If an error message appears, follow the
on-screen instructions.
For further details, visit the following
website and check the FAQ contents:
http://www.sony.com/blurayupdate
13
Select "Finish," and press ENTER.