Sony WH-L600 Help Manual page 32

Help Guide
Digital Surround Headphone System
WH-L600
When you finished using the system
Place the headphones on the charging terminal of the processor.
1
The processor and the headphones are turned off automatically and the sound of the device will be output from the
TV automatically.
Hint
You can also turn off the headphones by pressing the POWER (power) button on the headphones for about 2 seconds. In this
case, the processor becomes standby mode automatically. To turn off the processor press and hold the
seconds or more.
If sound is not output from the TV automatically, set the audio output setting to the speakers of the TV. For details on the setting,
refer to the manuals supplied with the TV.
Note
If you disconnect the AC adaptor from the processor before turning off the headphones, noise may result.
4-732-288-11(3) Copyright 2018 Sony Corporation
32
(power) button for 3