Connecting To Digital Jacks (Optical/Coaxial) - Sony 4-120-891-11(1) Operating Instructions Manual

Connecting to digital jacks (OPTICAL/COAXIAL)

If your AV amplifier (receiver) has a Dolby
a digital input jack, you can enjoy Dolby Digital (5.1ch), Dolby Pro Logic (4.0ch), or DTS
(5.1ch) surround effects.
1
Connect the digital jack of the player
and your AV amplifier (receiver).
2
Set "Audio Output Priority" to
"Coaxial/Optical" in the "Audio
Settings" setup (page 44).
3
Make the appropriate settings in
"Dolby Digital" and "DTS" under the
"Audio Settings" setup (page 45).
Otherwise, no sound or a loud noise will
come from your speakers.
*1
Optical digital cable
(not supplied)
: Signal flow
Digital, Dolby Pro Logic, or DTS
Blu-ray Disc/DVD player
or
Coaxial digital cable
(not supplied)
AV amplifier (receiver)
*1
*2
*2
decoder and
21
,continued