Troubleshooting - Garneau e-URBANIA User Manual

6.3 TROUBLESHOOTING

This system can indicate all errors occurring on the Pedelec. To indicate that an error has occurred, the LEDs will flicker as described
in the table below.
Error code
The second LED flickers 7 times in rapid succession High voltage protection
The second LED flickers 8 times in rapid succession Error with the motor effect sensor
The first LED flickers once
The first LED flickers once then
the second LED flickers twice
The first LED flickers once then the second LED
flickers 3 times
The first LED flickers twice then
the second LED flickers once
The first LED flickers twice then the second LED
26
flickers twice
The first LED flickers 3 times in
rapid succession
Error definition
The motor temperature has reached the
max protection value
Fault with the current sensor in the
controller
Error with the temperature sensor in the
battery
Error with the wheel speed sensor
BMS communication error
Communication fault
Solution
Check the battery voltage using the app
Have your dealer check the system
Stop riding and wait until the LED stops flickering
Have your dealer check the system
Have your dealer check the system
Have your dealer check the system
Have your dealer check the system
Have your dealer check the system