Close Document; Opening The Manual - Baum Pronto! 18 V4 Short Manual

5. Go up or down with the Navistick to "Storage Card" and move the Navistick right to open the
folder. This accesses the "Edit" folder which contains your text files. (To select another folder, move
the Navistick up or down to the "Edit" folder)
6. Open the "Edit" folder by moving the Navistick to the right and enter the list of text files
7. Move the Navistick up or down to the test file
8. Call up the command menu with S3 briefly or the command "B3 and B5 with the left thumb key".
9. This opens the first menu item "File" – move the Navistick to the right to access the submenu
10. This accesses "New folder" – move the Navistick up or down to "Delete"
11. Press the left thumb key to confirm "Delete" and a security question will appear
12. Move the Navistick up or down to select "Yes" and press the left thumb key
13. This will delete the test file from the storage card. You will be taken back to the file list where
other files can be deleted or opened.
Although the file has been deleted from the storage card it can still be found on Prontos internal
RAM, i.e. it can still be displayed on the Braille display in word processor and could be saved under
the new name.

8.11 Close Document

To delete a file from RAM it must be closed in Word processor. Switch to Word processor by
pressing the system key S1 slightly longer, or go to the main menu and select "Word processor".
Then proceed as follows:
1. Press S3 once briefly to open the command menu and you will be taken to the first entry, "File"
2. Move the Navistick to the right and then down to "close", and then press the left thumb key (B9)
3. You will now be in either another open file or a blank document.

8.12 Opening the Manual

The manual and its individual chapters can be opened quickly from the main menu under the
"Help" entry. The file will be displayed in the Word processor i.e. when a chapter from the Handbook
is selected you will be taken straight to the Word processor.
To select and open a chapter from the manual, proceed as follows:
1. open the main menu by pressing and holding the system key S3. If the key is released too quickly
only the command menu will open which must then be closed by pressing S3 once again briefly.
2. You will be taken to an entry in the main menu. Move the Navistick up or down to access further
entries.
3. As soon as "Help" is reached, stay on it and either press the left thumb key (B9) or move the
Navistick once to the right.
4. A submenu will open with further entries.
5. Move the Navistick up or down to the "Manual" entry, and either press the left thumb key (B9) or
move the Navistick once to the right.
6. The individual chapters from the manual will be listed. Move the Navistick up or down to the
desired chapter and open it by pressing the left thumb key (B9).
At this point you have already learned a good deal. You can write and save texts, open the manual
18