Preparation Of Sd Cards; Cards That You Can Use With This Unit - Panasonic AG-AC90P Manual

Preparation of SD cards

Cards that you can use with this unit

Use SD cards that are Class 4 or higher although Class 10 SD cards are recommended.
This unit (an SDXC compatible device) is compatible with SD Memory Cards, SDHC Memory
Cards and SDXC Memory Cards. When using an SDHC Memory Card/SDXC Memory Card with
other equipment, check the equipment is compatible with these Memory Cards.
SD Memory Card, SDHC Memory Card and SDXC Memory Card
● 4 GB or more Memory Cards that do not have the SDHC logo or 48 GB or more Memory Cards that
do not have the SDXC logo are not based on SD Memory Card Specifications.
● Please check the latest information on the support website below.
http://pro-av.panasonic.net
Inserting/removing an SD card
When using a non Panasonic SD card for the first time, or one which was previously used on
another equipment, it is necessary to format the SD card. When the SD card is formatted, all of
the recorded data is deleted. Once the data is deleted, it cannot be restored.
Caution:
Check that the access lamp has gone off.
4
A
C B
●
Access lamp
A
● When this unit is accessing the SD card,
the access lamp lights up.
1
Open the SD card slot cover and
insert (remove) the SD card into
(from) the card slot B.
● One SD card can be inserted into each of the
card slot 1 and the card slot 2.
● Face the label side
in the illustration and press it straight in as far
as it will go.
● Press the center of the SD card and then pull
it straight out.
2
Securely close the SD card slot
cover.
● Securely close it until it clicks.
C
in the direction shown
●