Special Remote Control Function; Cleaning - Carrier Allegro 51AKE075 Owner's Manual

Special remote control function

AUTO MODE
This function is available exclusively by infrared remote control.
1
2
• Using the operating mode selector (button
the mode chosen.
• By pressing the temperature selectors (buttons 1 and 9) select the desired temperature* which will appear on the display area (F).
• Switch on the unit by pressing button
*: The most comfortable temperature settings is between 21°/28°.

Cleaning

GB - 10
9
8
2
) select AUTO. For confirmation, the arrow of operating mode display (B) will indicate
8
. The fan speed will be selected automatically.
Clean the filter at least once
every 2 weeks to prevent
decreasing of air flow
because of dust.
Removal:
• Pull out the air filter cover
and remove the air filter.
• Wash the air filter by
damping it gently in warm
water (about 40°) with a
neutral detergent. Rinse
the filter and let it dry in a
shady place.
Mounting:
• Attach the air filter to its
cover using the fixing
hooks on the inner surface
of the cover.
• Put the filter cover back on
the unit.
B F
To clean the appliance use only a damp cloth and soap.
NEVER use spray or flammable liquids.
If the unit is not used
for extended periods:
• Remove the residual
condensation water
through the lower
hole situated at the
rear of the indoor
unit (continuous
drainage hole)
• Clean the filters.
• Rewind the electrical
cable
• Cover the air
conditioner with a
bag.