Add A Controller; Renaming A Zoneplayer Or Zonebridge - Sonos Digital Music System User Manual

Chapter 2: System Setup
Or,
• Using a Sonos Controller, select System Settings>Add a ZonePlayer or Zone-
Bridge from the Music menu.

Add a Controller

You should charge your new Sonos Controller when you remove it from the packaging.
Plug it into the power adapter, and then follow the Controller's on-screen prompts to
add it to your music system (you can use the Controller while it is charging.)
For additional information about your handheld Controller, see "The Sonos®
Controller" on page 7-1.

Renaming a ZonePlayer or ZoneBridge

If you name a ZonePlayer incorrectly, or if you move your ZonePlayer to another room,
you can rename it to suit your preference.
To rename using Desktop Controller software
1. From the Zones menu, select ZonePlayer Settings. If you want to change a
ZoneBridge instead, select ZoneBridge Settings.
2. Select the zone you wish to change, and click Settings. From the Zone Name tab,
select a name from the list, or type a new name for this ZonePlayer in the Zone
Name field, and then click OK.
• During the setup process, you will be asked to press and
release the Mute and Volume Up buttons simultaneously
on the ZonePlayer you are adding.
• You may release the buttons as soon as the Mute indicator
(green) and the ZonePlayer Status Indicator (white) start
to blink alternately (this takes approximately 1
second.)
• When the ZonePlayer has been successfully added to your
music system, the Mute indicator will go out and the
ZonePlayer Status indicator will change to solid white.
2-13