Page 1
125LB TOW-BEHIND SPREADER Instruction & Assembly SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE REV122116 BT1200...
Page 2
SAFETY RULES READ THE DIRECTIONS BEFORE ASSEMBLY Read the towing vehicle owners manual and towing vehicle safety rules. Know how to operate your tractor before using the tow-behind spreader. Read the chemical label instructions and cautions for handling and applying the chemicals purchased for spreading.
Page 3
REMOVE AND IDENTIFY LOOSE PARTS FROM CARTON AND BAG...
Page 4
ASSEMBLY INSTRUCTIONS 1. Attach tow bar (#31) to the frame tube assembly (#14) using hex bolt M8x50 (#21), big flat washer Ø8 (#22), arc washer Ø8.5x Ø24 (#28) and lock Nut M8 (#29). 2. Attach the gauge plate (#38) to the tow bar (#31) using hex bolt M6x45 (#26), big flat washer Ø6 (#37), arc washer Ø6.5x Ø18 (#30) and lock Nut M6 (#13).
SPECIFICATION Capacity: 125LB / 60L Dimension of Hopper: 29-1 1/2in.x16-1/2in.x13-2/5in. (75x42x34cm) Length of Tow Bar: 29-1/8in. /8in. (74cm) Overall Size: 42-1/8in.x30-1/4 1/4in.x30-3/8in. (107x76.7x77cm) Wheel Diameter: 14-1/4in. in. (36cm) Wheel Width: 5-1/8in. (13cm) GENERAL WARNINGS GENERAL WARNINGS Operator must read and understand all safety nderstand all safety and warning information, operating instructions, maintenance information, operating instructions, maintenance and storage instructions before operating this equipment...
Maintenance Maintenance and Storage MAINTENANCE After each use clean material out of hopper. material out of hopper. • Rinse/dry inside and outside of the spreader after each use. Rinse/dry inside and outside of the spreader after each use. • Before operating make sure the tires have the RECOMMENDED Before operating make sure the tires have the RECOMMENDED TIRE PRESSURE TIRE PRESSURE.