Page 1 3M™ ESPE™ Lava™ Chairside Oral Scanner User Guide Version 3.0 The 3M ESPE Lava Chairside Oral Scanner User Guide is intended for licensed users of the 3M ESPE Lava Chairside Oral Scanner (Lava C.O.S.) only. This document contains proprietary and confidential information of 3M ESPE. No part of this document may be duplicated or transmitted in any form without prior written consent of 3M ESPE.
Page 2: Table Of Contents
The Home Screen ......................27 Cases in Progress Tab ..................... 29 Display an Active Case ..................30 Delete an Active Case ..................30 Completed Cases Tab ..................... 30 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 2 of 118...
Page 3 General Scanning Tips ..................96 Appendix A: Status Icons ..................97 Appendix B: Management Screens ................. 99 Appendix C: Active Wand Buttons ..............115 Index ........................117 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 3 of 118...
Page 4: General Information
General Information The 3M ESPE Lava C.O.S. is used to capture high-accuracy scans of human teeth. Data from these scans are used in manufacturing oral prostheses, such as crowns, inlays, and onlays. The main system components are: Scanning wand – A freehand, high-accuracy video camera used to acquire three-dimensional data in real-time.
Page 5: Components Of The Lava Chairside Oral Scanner
Components of the Lava Chairside Oral Scanner Touch screen display Tether cord Wand holster Scanning wand Computer (inside) Cart assembly Caster lock 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 5 of 118...
Page 6: Trademarks
Trademarks 3M ESPE Lava Chairside Oral Scanner is a trademark of 3M ESPE and Brontes Technologies, a 3M Company. All rights reserved. About the Lava C.O.S. User Guide This guide is designed for operators of the Lava Chairside Oral Scanner (C.O.S.). It contains information on the proper use of the system, including the care and handling of system components;...
Page 7: Problem Reporting And Suggestions
Your comments are important to us. You can influence the quality and future design of the system and its documentation. Please submit problems, questions, enhancements, and recommendations to the 3M Customer Service and Support Center by phone, mail, e-mail, or fax.
Page 8: Lava C.o.s. Quick Reference Guide
3. Scan the prepared tooth and contact walls of the adjacent teeth. Important: Do not repowder or change the field any time the wand is flashing. 4. Select the Add Prep button. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 8 of 118...
Page 9: Prescription
Rx Digital Signature screen. Enter your PIN to sign the prescription. Log Out/Shut Down Select the Power button then select Log Out or Shut Down. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 9 of 118...
Page 10: Safety
CAUTION: The Lava C.O.S. is NOT a field-serviceable device. If you experience a problem with the system, call 3M ESPE Customer Support at 1-877-SCAN-LAVA (1-877- 722-6528) to report the problem. Do not attempt to service the unit yourself or allow any unauthorized personnel to service the system.
Page 11: Emi, Fcc And Safety Standards Pending
Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 11 of 118...
Page 12 (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 12 of 118...
Page 13 Foreign body and moisture intrusion rating per IE C/EN60529. Protection against solid bodies: objects greater than 12mm. Protection against liquids: IP22 75° – 90° dripping water. AC (alternating current) voltage. Do not dispose. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 13 of 118...
Page 14: Equipment Specifications And Classifications
64cm x 74 cm (25 in. x 29 in.) Monitor Height Adjust 94cm to 107 cm (37 in. to 42 in.) Monitor Tilt Adjust +5° to -30° Power Input 240V 60Hz 400W 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 14 of 118...
Page 15 5.7 cm (2.2 in.) Tether cable length 2.99 m (9ft. 10 in.) Temperature: Operating +10°C to +35°C (+50ºF to +95ºF) Storage -10°C to +50°C (+14ºF to +122ºF) 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 15 of 118...
Page 16: Safety Standards
Medical Devices with a Patient applied Part. Warranty 3M ESPE warrants this product will be free from defects in material and manufacture. Please refer to your Purchase and Sales agreement for full warranty terms. 3M MAKES NO OTHER WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Page 17: Limitation Of Liability
Limitation of Liability Except where prohibited by law, 3M ESPE will not be liable for any loss or damage arising from this product, whether direct, indirect, special, incidental or consequential, regardless of the theory asserted, including warranty, contract, negligence or strict liability.
Page 18: Cleaning Procedures
Cleaning Procedures After each patient, clean the touch screen, bezel (the border that frames the touch screen), the body of the wand and the tether cord. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 18 of 118...
Page 19 (70% IPA [isopropyl alcohol] can also be used to clean the touchscreen, but not the other surfaces. Avoid contact with skin.) _______________ BIREXse is a registered trademark of Biotril. CaviCide is a registered trademark of Kerr/Metrex Corporation. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 19 of 118...
Page 20: Disinfection Procedures
1. Unplug the wand from the dental workstation by pulling gently on the textured portion of the connector from the back of the unit. (The unit itself can remain on.) 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 20 of 118...
Page 21 3. Clean the lens area of the wand for two minutes using a soft-bristled brush and enzymatic detergent prepared with warm tap water (100-120°F). 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 21 of 118...
Page 22 9. Completely wipe down the lens area with a lint-free wipe soaked in Birex. 10. After disinfection, rinse the lens area of the wand with one liter of sterile water. 11. Dry and barrier the wand. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 22 of 118...
Page 23: Pre-Use Check
Wireless Network Connection The Lava C.O.S. comes with a wireless access point that a 3M ESPE representative will install at the dentist office. Many dentist locations will have an existing intranet network with a router that is either store- bought or supplied by the location’s ISP.
Page 24: Turning On And Logging In To The System
• The access point comes with a 2-prong transformer-style plug. • The 3M ESPE access points can be used only by the Lava C.O.S. Turning On and Logging In to the System Powering On: CAUTION: Be sure that the power cord is unplugged before moving the system.
Page 25 Customer Support. Do not attempt to open or service the unit yourself. Attempting to open or service the unit yourself could damage the unit and void the warranty. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 25 of 118...
Page 26: To Log In To The System
2. Enter your personal identification number. 3. Select the Login button. Log In screen To log out of the system: 1. Select the Power icon. 2. Select Log Out. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 26 of 118...
Page 27: To Shut Down The System
View cases and their status • Launch a practice scan • Access the Management screens • Receive system message alerts • See the status of the Case Manager connection 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 27 of 118...
Page 28 Home screen 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 28 of 118...
Page 29: Cases In Progress Tab
Customer Service. See Appendix A for details. The message line provides additional information and instructions, if needed. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 29 of 118...
Page 30: Display An Active Case
For example, if scans have been performed but not yet uploaded, those cases would be listed here. When you turn on the Lava C.O.S., the Attention tab displays first if something needs your attention. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 30 of 118...
Page 31: Other Home Screen Features
For more, see the section on Scanning. Many management tasks are designed to be performed by 3M ESPE Customer Service, but there are a few features, like naming the device and adding a user you may use. See Appendix A: Management Screens, for details.
Page 32: Reset Pin
And you’ll find the Home icon useful. Touch the Home button and you are returned to the familiar Home screen (or, in some cases, to the previous screen). Reset PIN 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 32 of 118...
Page 33 PIN?” button. Touch that button, then enter a new PIN on the New Password screen that appears next. To reset a PIN, you will need to know the Case Manager account number, or you can call our Customer Service number: 1-877-SCAN-LAVA. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 33 of 118...
Page 34: Search For A Patient/Add A New Patient
Name fields. The list of patients is filtered as you type. After finding a patient, select the name from the list to display the Patient’s screen. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 34 of 118...
Page 35 Patients list. The Patient screen is displayed. Patient box Patient Screen 2. Touch a Name entry field, for example, Last Name, in the Patient box. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 35 of 118...
Page 36 * The Patient ID is an optional, unique identifier created by the dental practice. If you do not know the Patient ID to enter, see your Office Manager or the person responsible for patient records. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 36 of 118...
Page 37: Scanning
Lava C.O.S. training. A Basic Scan 1. Select an existing case (or touch the Scan Now button for a new case) to go to the Scanning screen. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 37 of 118...
Page 38 Left, anterior, right bites – Select which bite to scan to create a registration.* (After the bite has been scanned, the icon displays in color.) 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 38 of 118...
Page 39 Note: After you have completed a scan, you can also use these icons to display various views of the scan for review: upper or lower arch, bite scan, or still image of the prep. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 39 of 118...
Page 40 • Add a prep by touching the . This saves the scan and displays the button Prep Selection screen. (See “Add, Review, and Approve a Prep.”) 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 40 of 118...
Page 41: Visual Cues While Scanning
Timer: Displays the time elapsed during a scan. See “Maximum Scanning Times,” later in this section. Zoom Tools Timer Rotation Indicator Depth Indicator Surface - white Video Frame Box Surface - red Visual Cues 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 41 of 118...
Page 42 In the example above, areas of the tooth are displayed in gray. Those areas are too far away from the scanner’s lens to be acquired. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 42 of 118...
Page 43 Note also that the dynamic yellow dot is larger than the dotted circle, another indicator that the scanning lens is too close to the tooth. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 43 of 118...
Page 44: Maximum Scanning Times
(not including bite scans) exceeds 15 minutes To avoid reaching these maximums, it’s a good practice to delete any unnecessary or superfluous scans for a case. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 44 of 118...
Page 45: Pause Mode
• Return to a previously scanned occlusal surface. White = currently active video Yellow = already captured video Pause mode 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 45 of 118...
Page 46: Smart Scan
Smart Scan gives you the capability to remove unwanted data and scan “underneath” to the desired tooth surface. A movable object has been scanned 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 46 of 118...
Page 47 Smart Scan deletes artifacts and scans “underneath” original location The unwanted artifacts sparkle when detected by the Lava C.O.S. 3.0 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 47 of 118...
Page 48 Areas not resolved by Smart Scan will appear in Please note that some objects will be resistant to Smart Scan, so it may still be necessary to delete the scan and start over. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 48 of 118...
Page 49: Reviewing The Scan
Make sure the scan is complete • Accept (or reject) scan merges and registrations • Access the Prep Selection screen, if you’re adding a prep Scan Review 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 49 of 118...
Page 50 • Reject the scan, or • Access the Prep Selection screen to add a prep • Or, you can rewind the scan , explained below. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 50 of 118...
Page 51: Scan Rewind
It is a required step in the scanning process and must be completed before you can sign a prescription. See “Add, Review, and Approve a Prep.” 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 51 of 118...
Page 52: Continue Scanning And Merging Scanning
Continue Scanning In this example, after an initial scan is stopped (with the Start/Stop button), a hole becomes apparent when the scan is rotated. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 52 of 118...
Page 53 While scanning, the screen will display a thumbnail, a reduced version of the current scan, on the left side of the screen. The thumbnail is labelled, “Current.” It can be useful as a guide as you continue scanning. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 53 of 118...
Page 54 When the scan is stopped again, the Lava C.O.S. adds the newly-captured scan data to the previous scan data. This happens each time you continue and then stop a scan by pressing the Start/Stop button. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 54 of 118...
Page 55 (reject) button if it’s unacceptable, and try another scan; or press the Add Prep button to add a prep (see below). 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 55 of 118...
Page 56 Note: While scanning, you will need to overlap the saved scan to achieve a successful merge of the two scans. When you stop the scan next time, the system automatically merges the two separate scans. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 56 of 118...
Page 57 When you stop scanning, press the (check) button if the merged scan is acceptable and you want to save it. Press the (reject) button if it’s unacceptable, then try another scan. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 57 of 118...
Page 58: Completion Arrows
To improve your scan and remove the completion arrows, resume scanning in the area of the arrow from the lingual to facial surface. The next time you review that scan, the arrow should be gone. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 58 of 118...
Page 59 You cannot, however, fix the arrows on an accepted scan. Rather, you would have to start the scan over again. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 59 of 118...
Page 60: Add, Review, And Approve A Prep
Note: For multiple prep cases, repeat these steps for each prep. See “Multiple Preps” at the end of this topic. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 60 of 118...
Page 61 (Or cancel your selection and return to the previous screen by pressing The system zooms in on a still image of the selected tooth, taken from the video footage of the scan. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 61 of 118...
Page 62 You can also drag your finger on the screen to rotate the scan, and then tap again for the close-up image. The scan rotates about the last point selected. To view different areas or angles, select a different point and rotate again. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 62 of 118...
Page 63 For example, if you tap a spot inside the highlighted area on the scan, as shown by the arrow above, the system will zoom in to a close-up video still image of that spot. See next page. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 63 of 118...
Page 64 For a three-dimensional look at the still image of the prep, select the Stereo glasses icon. The system switches to stereo mode. You will need to wear red/blue stereo glasses to perceive the 3D image. See the following page. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 64 of 118...
Page 65: Occlusal Reduction Tool
You can select a range of between 0 and 3.0 millimeters for the system to measure and label. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 65 of 118...
Page 66 The prep may require additional reduction of its red area to achieve an acceptable occlusal fit. Please note that, for the Occlusal Reduction Tool to be effective, the bite scan should always include your prepared tooth or teeth 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 66 of 118...
Page 67 You use the dropdown toolbar if you are making multiple preps instead of single preps, although the procedure is slightly different: 1. From the Scanning screen, select the Check Prep button on the top toolbar. The dropdown toolbar is displayed. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 67 of 118...
Page 68: Margin Annotation Feature
3. Move the crosshair to the spot on the margin you want to mark. 4. Remove your finger to place a yellow dot at the crosshair. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 68 of 118...
Page 69 , then touch the yellow dot to be removed. • To review the area with the magnifying square and not place dots on the image, touch the magnify icon 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 69 of 118...
Page 70: Bite Scan
The system will display the two arches already scanned. toolbar. Scanned arches 2. Scan the bite. When you’re done, the system will merge the upper, lower and bite scan scans into proper registration. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 70 of 118...
Page 71 System-generated bite registration 1. Accept or reject the registration by selecting the Accept or Reject button. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 71 of 118...
Page 72 In such a case, the unregistered bite is sent to the lab with a “warning badge” and the lab will need to articulate the bite manually. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 72 of 118...
Page 73: Scanning And Reviewing Tools And Features
Turntable – Auto-rotate the scan about the center point. • Completion Arrows – Indicate an incomplete scan. See “Completion Arrows.” • Presentation View – Fill in holes for presenting the scan to the patient. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 73 of 118...
Page 74: Shift And 3D Rotate: Drag Or Tap
When you scan the upper anterior and rotate the wand severely from its original position, the Lava C.O.S. detects a mismatch in the orientation of the wand and the on-screen image and 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 74 of 118...
Page 75: Inspection
(see the illustration below) or you can press the Start/Stop button on the wand to proceed directly to scanning. Note: The video captured is for review only and cannot be saved. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 75 of 118...
Page 76: The Additional Scan Feature
While inspecting, the Lava C.O.S. will automatically default to an appropriate mirror mode: on for the upper arch, off for the lower arch. You can switch between mirror modes by touching this icon. The Additional Scan Feature 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 76 of 118...
Page 77: Deleting Scans
Select whether you want to delete the last scan or all scans of the current type, for example, all maxillary scans. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 77 of 118...
Page 78: Alternate Starting Wand Orientation
Please note that the alternate wand thumbnails illustrate the orientation of the wand, not its position. For example, here is a wand orientation available for the maxillary arch: 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 78 of 118...
Page 79 The starting positions below would be acceptable, because their orientations are the same as the one selected: Acceptable alternate starting positions 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 79 of 118...
Page 80: Wand Cursor
Press the Select button on the wand to display the cursor. Use the left/right arrow buttons to move the cursor (the green hand) over your choice, then press the Select button on your wand to make your selection. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 80 of 118...
Page 81: Practice Scanning
There is no prescription to fill out when scanning is done. And, when you leave the Practice Scan screen, all scans are deleted. Important note: You cannot save a practice scan or send it to your lab. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 81 of 118...
Page 82: Filling Out The Electronic Prescription
1. Select the case for which you want to fill out a prescription. (If the system displays the Scan and Review screen instead of the Prescription screen, touch the Prescription tab.) A blank Prescription screen for the patient is displayed. Prescription screen 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 82 of 118...
Page 83 5. Enter the information required, including: • restoration type • selected and missing teeth • options for restoration materials • shade selections, etc. • notes for the restoration 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 83 of 118...
Page 84 Your license number must also be part of your profile before you can sign prescriptions. This number is entered in the License field of the Users screen. (See Appendix B, Management Screens, “Management screen/Settings tab/Users.”) 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 84 of 118...
Page 85 After you fill out a prescription, select the Save as Defaults option. When you fill out a subsequent prescription, select the saved default from the restoration type pop-up. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 85 of 118...
Page 86: Uploading Cases
If that doesn’t work, call Customer Service. This icon also may appear temporarily when the Lava C.O.S. is reconnecting its Case Manager connection. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 86 of 118...
Page 87 Note: Cases do not get processed or uploaded when the device is shut down. If you choose to shut down immediately, it is recommended you plug the device back in and restart as soon as feasible. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 87 of 118...
Page 88: Maintenance Check
Note: The test fixture has a magnetic back so it can be attached to the metal wand holster for storage. If the test fixture is lost or misplaced, please contact Lava C.O.S. support to acquire a new test fixture. Maintenance Check 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 88 of 118...
Page 89 Identify a prepped tooth both by number and on the scan. Start and stop a scan by pressing this button on the screen (or on the wand). 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 89 of 118...
Page 90 Delete the last scan or all scans of a selected arch. Warm up the wand to prevent fogging. The wand will light for up to 2.5 seconds. Proceed directly to Prep Selection screen. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 90 of 118...
Page 91 Temporarily fills in holes to present the image of a complete scan for presentation. Scan Rewind – Rewind the scan in 10-second increments, or back to last saved scan. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 91 of 118...
Page 92 Display the image in 3D. Touch the scan to review the prep area. Add a dot to the margin. Remove a dot. Magnify image (without placing dots). 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 92 of 118...
Page 93 If that doesn’t work, call Customer Service. This icon also may appear temporarily when the Lava C.O.S. is reconnecting its Case Manager connection. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 93 of 118...
Page 94: Scanning Recommendations And Tips
Hold the wand using the handshake grip (see “The Grip” on the next page). Use your non- dominant hand as a fulcrum for the wand. Scanning Posterior Teeth For anterior teeth, position the wand vertically. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 94 of 118...
Page 95: The Grip
Anchor your other hand on the patient (two possibilities are shown below). Turn the wand with your dominant hand. Handshake grip Alternate placement of supporting hand 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 95 of 118...
Page 96: General Scanning Tips
For best scan quality, keep the lens approximately 10mm above the surface being scanned, as shown by the depth indicator. 10 mm Proper scanning distance 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 96 of 118...
Page 97: Appendix A: Status Icons
A case was signed 2 or more days ago but the system has not yet started to upload the case. A signed case has a critical issue that should be addressed. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 97 of 118...
Page 98 The Lava C.O.S. has successfully processed and uploaded the case. This case was manually archived by an earlier version of the software (pre-1.5). 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 98 of 118...
Page 99: Appendix B: Management Screens
Management screen. There are three tabs in this section: Settings, System, and Maintenance. The Management screens are generally designed for the use of 3M ESPE Customer Service. For example, they may need to go to the Management screen to check the wireless connection or to get system information and messages from the unit.
Page 100 To edit the information on this screen, press the Edit button then use the on-screen keyboard to type in the information that has changed. Required fields are marked with an asterisk. Press OK when you’ve completed the changes. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 100 of 118...
Page 101 Management screen > Settings tab > Device Name You can create a name for your Lava C.O.S. This capability is helpful for distinguishing between multiple Lava C.O.S. devices on your office’s account. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 101 of 118...
Page 102 To make a user active or inactive, select the user name. It will be displayed in red. Then press the Activate or Deactivate button, as appropriate. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 102 of 118...
Page 103 Management screen > Settings tab > Labs This screen displays the list of labs 3M has entered into the system along with their status, determined by the dental practice. To make a lab inactive (for example, your dental practice does not use the lab), select the lab’s name and press the Deactivate button.
Page 104 Management screen > Settings tab > Localization This screen is used to select localization information for the system, including time zone and tooth layout. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 104 of 118...
Page 105 Management screen > System tab > Messages System messages are displayed here. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 105 of 118...
Page 106 Management screen > System tab > System Info This screen displays a wide range of system information. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 106 of 118...
Page 107 Management screen > System tab > System State This screen displays information about the hardware of the Lava C.O.S. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 107 of 118...
Page 108 Management screen > System tab > Operation Operational and safety guidelines for the Lava C.O.S. are displayed here. These are the same guidelines printed in this User Guide. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 108 of 118...
Page 109 Management screen > System tab > About This screen displays information about the system, i.e., copyright and software information. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 109 of 118...
Page 110 Management screen > Maintenance tab > Wireless This screen displays information about the system’s wireless connection. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 110 of 118...
Page 111 Management screen > Maintenance tab > Verification Test This screen displays the last time the system verification test was run. You can run the Verification Test at any time from this screen. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 111 of 118...
Page 112 This screen displays the last time the Maintenance Check was run. You can also perform a maintenance check of the wand by following the on-screen instructions. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 112 of 118...
Page 113 If you need help with the system, go to the Help Line button on this screen and call the Customer Support number. You will be given instructions on how to proceed. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 113 of 118...
Page 114 Management screen > Maintenance tab > Logs Customer Support uses this screen to display system logs. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 114 of 118...
Page 115: Appendix C: Active Wand Buttons
Press the Select button on the wand to make a selection from an on-screen menu. If the Maxillary Flip feature is active, the Select button mimics the on-screen Home Base button. 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 115 of 118...
Page 116 10 Maguire Road, Suite 310 Lexington, MA 02421 General: +1 (781) 541-5200 Customer Service and Support: 1-877-SCAN-LAVA (1-877-722-6528) Customer support email: cossupport@mmm.com Lava C.O.S. Serial Number: 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 116 of 118...
Page 117: Index
27, 87 log in, 24, 26 timer, 41 log out, 26 toolbar icons, 38, 40 maintenance, 99, 114 touch screen, 4 Maintenance Check, 88 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 117 of 118...
Page 118 Turntable, 73 Warranty, 16 upload cases, 86 wireless connection, 23 upload icons, 86 wireless icons, 93 vents, 11, 17 zoom tools, 41 do not block, 11 3M ESPE Lava Chairside Oral Scanner User Guide - Beta page 118 of 118...

3M ESPE Lava Chairside Oral Scanner User Manual

Quick Links

Related Manuals for 3M ESPE Lava Chairside Oral Scanner

Summary of Contents for 3M ESPE Lava Chairside Oral Scanner

Table of Contents