Basic Operation
BARO UNITS ADjUSTMENT (Refer to Figure 2-5)
The Baro units adjustment is available only with SW 2.0. When selected in
the menu window the current barometric unit is shown.
•
Press of the +/- buttons to change the baro value from/to one of the
following units: "in. Hg", "hpa" or "mb".
•
The unit value changes in the baro window as the units are changed in
the menu.
BARO ADjUSTMENT (Refer to Figure 2-6)
When selected in the menu window the current barometric pressure is
shown. The baro value can be changed as follows:
•
A single press of the +/- buttons increases or decreases the baro value
by 0.01 inches of mercury "in. Hg" or (SW 2.0 only), by 1 for "hpa" or
"mb".
•
Holding in the +/- buttons adjusts the baro value until released.
•
A single press of the Select S button sets the baro value to the standard
value of 29.92 in. Hg or (SW 2.0 only) 1013 hpa or mb.
The barometric pressure has a range of between 27.00 and 32.00 in. Hg.
or (SW 2.0 only) 914 and 1083 for hPa or mb. The last change to the baro
value will be saved to memory and applied at power-up.
2-4
Figure 2-5: Baro Unit Adjustment Menu
Figure 2-6: Baro Adjustment Menu
ESI-1000
Pilot's Guide