Set The 4-20 Ma Range; Calibrate The Output; Choose 4-20 Ma Fault Condition - ECD T80 Manual

Configure Outputs - 4-20 mA

Set The 4-20 mA RANGE

Default setting is the range of
the sensor
Select 4 mA/20 mA, enter value
HOME, EXIT, SAVE

Calibrate the Output

Transmitter sends out 4 mA
signal
Enter measured value press OK Enter measured value press OK
Transmitter sends out 20 mA
signal
Enter measured value and press
OK
Repeat as needed

Choose 4-20 mA Fault Condition

3.5 mA
22 mA
Disable, none