Remote Configuration - Caimore CM510-72F User Manual

If ON, DTU will go into sleep mode if there is no data
Sleep Mode
need to be sent to server.
Configure registered packet
1) Send default registered packet
Please set "value" of "custom registered packet" to "<DEFAULT>" or keep it in
blank.
2) Do not send the registered packet
Please set "<NONE>" in the "value" of "custom registered packet"
3) Set custom registered packet
Please set corresponding string in the "value" of "custom registered packet"
 After setting, please click

2.2 Remote Configuration

It is a configuration mode used in when the DTU has been put into use, and it's
inconvenient for user to configure it on site.
Start up the corresponding port then wait a moment, DTU will connect, and after DTU
is connected, you can configure it remotely.
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
Save and reboot it.
8