Advance Config - Caimore CM510-72F User Manual

2.1.4 Advance Config

Description of Advance Config:
Name
Work Mode There is only TCP mode available.
Debug Level Different level debug information shown at Log page.
Packet Interval The interval to receive data from serial port.
When the number of times that DTU fails to reconnect
Reconnection
server over the value of this parameter, DTU will
Times
reboot.
Reconnection It is interval time of trying to connect server again
Interval when DTU disconnect with center server.
Heart Packet
The interval to send heartbeat packet to sever
Interval
TCP Maximum
Transmission The maximum transfer bytes during data transmission. Range is 1~1450.
Unit
Automatic When the device startup time reaches this value, the
Restart Time device will restart automatically.
Application There
Protocol CaimoreProtocol
Registration
The packet used to register in server.
Packet
When DTU has no data need to send to sever, it will
Heartbeat
send heartbeat packet to serve to let server know this
Packets
device is online
Description
are two mode available:
厦 门 才 茂 通 信 科 技 有 限 公 司
Xiamen Caimore Communication Technology Co.,Ltd
Transport
7
Notice
0=No info,
1=partial info,
2= the entire info
The unit is ms, range is 1~65535.
It is usually set as 200ms.
Range is 0~65535.
It better to set the parameter with a
small figure.
The unit is second, range is
15~360.
The unit is second, range is
15~360.
Unit: minutes. Range is 0~4320.
0 means disable this feature.
/