Maxcom MK241 User Manual page 7

After placing the battery close the battery
•
cover carefully and make sure you heard
"click" sound
Charging
Never use a charger or battery that is damaged or
not manufactured by the Manufacturer. Accessories
of different type or modifications might damage the
phone and might give basis for violation of
regulations pertaining to radio devices, and might
void the warranty.
When the battery is discharged, there will be an
icon of the empty battery displayed on the screen.
To charge the battery, plug the charger to the power
outlet and to the phone. The battery icon will show
little bolt symbol as long as the battery is being
charged. Important! While charging, the air
temperature must be between 0°C and +40°C. After
certain time, batteries wear out; therefore, their
performance time will get shorter and shorter over
time.
In order to charge phone:
1. Plug charger into power outlet
2. Plug charger cable into charging port at the
bottom of the phone. On battery icon you will
be able to see little bolt symbol
3. When phone will be fully charged unplug
charger from power outlet and cable from
phone
Attention:
Before starting charging make sure the
•
battery is properly installed
During charging do not take out battery
•
7