Operation; Overheating Protection; Cleaning And Care - Kalorik TKG CV 1003 T User Manual

Fax +32 2 359 95 50


OPERATION

When the appliance is switched on for the first time, a slight smell may be emitted. Please
ensure sufficient ventilation. This smell will disappear very quickly.
With the power switches you can regulate the heating intensity. The thermostat allows you to
keep a constant room temperature.
Power switches
= Turbo switch (fan)
Left power switch
Right power switch
Both power switches
To increase the hot air circulation, the fan may be used in addition to the heating function,
regardless of the heating level selected.
For easy recognition of the heating level selected at any time, the switches are equipped with
an indicator lamp. You can also use the turbo function without heating. In this case, fresh air
will be blown.
Once a switch has been pressed to start operation, the integral thermostat will switch the unit
on and off automatically to keep the temperature at a constant level.
Thermostat
Using the infinitely adjustable thermostat control, the unit can be preset to a specific
temperature. When the intended temperature is reached, the unit will automatically switch off.
Once the temperature has fallen below the pre-set level, the heater will switch on again.
Note: the metallic parts of this appliance become hot during use so if you need to move the
appliance during use, use the side handles.

OVERHEATING PROTECTION

This heater is protected with an overheating protection that switches off the appliance
automatically in case of overheating, e.g. due to the total or partial obstruction of the grids. In
this case, unplug the appliance, wait about 10 minutes for it to cool and remove the object
that is obstructing the grids. Then switch it back on. The appliance should operate normally.
Should the problem persist, please contact the nearest customer service.

CLEANING AND CARE

 Before cleaning the appliance, ensure it is disconnected from the power supply and has
cooled down completely.
 To avoid the risk of electric shock, do not clean the heater with water and do not immerse
it in water or any other liquid. Clean the housing with a damp cloth.
 If necessary, dust particles accumulated in the air outlet openings may be removed with a
vacuum cleaner. This maintenance should be done regularly to assure the good
operation of the appliance.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
= reduced power (750W)
= medium power (1250W)
= full power (2000W)
11
Assembly page 11/44
TKG CV 1003 T - 140521