Table of Contents
Advertisement
OPERATION
All parameters are set with the rotary button.
Each function and parameters are shown on 2 digits display and different LEDs.
Programming
-
Make all the necessary connections and connect the equalizer to the mains.
-
Push on the rotary button for more than 3 seconds to enter into programming
mode.
Turn the button to select the desired mode.
‐
Push the rotary button to enter the selected mode.
‐
Inside the mode, turn the button to select the parameter (input, cluster, level,...)
‐
Push the button to confirm the parameter setting.
‐
The software version is displayed
followed by a dot.
Repeat this selection to set all parameters.
The LED is now RED colored
Display
LED returns to a GREEN color.
4
Advertisement
Table of Contents
