-
Turn the button to select Exit mode.
-
Push the button to confirm.
Note : the equalizer will go in 'stand-by' and will display a dot after 1 minute if the rotary /
push button is not activated.
CLUSTER PROGRAMMING
Setting clusters / UHF Input
The equalizer has 2 UHF inputs which are splitted over 8 clusters.
There are three possible configurations :
Input
UHF 1
Number of
8
Cluster (s)
7
5
To set the number of cluster(s) per input:
-
Turn the button to select Split Input mode.
-
Push the button to confirm.
UHF 2
UHF 1 clusters are indicated by the RED LEDs
n°. 1, 2, 3, 4, 5, 6, 7 and 8.
0
1
UHF 2 clusters are indicated by the GREEN LEDs n° 6, 7 and 8
3
The LED is green.
A dot is displayed.
The LED is green.
The LED is red.
5