Hoover DXOA 175AH/1-AUS Manual page 13

l
This option allows you to choose between
3 levels of wash intensity modifying the
length of the programme, depending on
how much the fabrics are soiled (can only
be used on some programmes as shown
in the table of programmes).
TEMPERATURE SELECTION
button
l
This button allows you to change the
temperature of the wash cycles.
l
It is not possible to raise the temperature
over the maximum allowed for the
programme, in order to protect the fabrics.
l
If you want carry out a cold wash all the
indicators must be off.
SPIN SPEED button
l
By pressing this button, it is possible to
reduce the maximum speed, and if you
wish, the spin cycle can be cancelled.
l
If the label does not indicate specific
information, it is possible to use the
maximum spin expected in the program.
To prevent damage to the fabrics, it is
not possible to increase the speed
over the maximum allowed for the
programme.
l
To reactivate the spin cycle press the
button until you reach the spin speed you
would like to set.
l
It is possible to modify the spin speed
without pausing the machine.
An over dosing of detergent can cause
excessive foaming. If the appliance
detects the presence of excessive foam,
it may exclude the spinning phase or
extend the duration of the program
and increase water consumption.
The machine is fitted with a special
electronic device, which prevents the
spin cycle should
unbalanced. This reduces the noise
and vibration in the machine and so
prolongs the life of your machine.
ACTIVE STEAM button
This button allows a specific treatment to
follow certain wash cycles (please refer to
the program table). The steam function
works by relaxing creases in wet garments
and as a result reduces the time needed to
iron these items. The fibres are regenerated
and refreshed by removing bad smells.
Every program provides a dedicated steam
treatment in order to ensure the maximum
cleaning efficiency according to the items
fabric type and colour.
This option must be selected before
pressing the START/PAUSE button.
START ONE TOUCH
Simultaneously pressing the START/PAUSE
and OPTIONS buttons allows a previously
downloaded cycle to be started whilst the
One Touch position is selected on the
programme knob (for downloading cycles
from the App see the relevant section of this
user manual).
KEY LOCK
l
Pressing simultaneously
TEMPERATURE SELECTION and SPIN
SPEED for about 3 seconds, allows you
to lock the keys. This will prevent
accidental or unwanted changes if a
button on the
accidently during a cycle.
l
The key lock can be simply cancelled by
pressing the two buttons simultaneously
again or turning off the appliance.
13
the load be
the buttons
display is pressed