Smartrise SRU Programming Manual
Hide thumbs
Also See for SRU:
- Programming instructions manual (11 pages) ,
- Programming instructions manual (26 pages)
Advertisement
Table of Contents
- 1 Addendum IV – Security
- 2 Security Setup
- 3 Per Floor Options – Floor # Is the Floor Selected for Security Options
- 4 Programming Example 1: (4-Stop, L, 1-3, Front Opening) – 24/7 Lockout with Card Reader in Car
- 5 Programming Example 2: (4-Stop, L, 1-3, Front Opening) – 24/7 Lockout with Access Codes
- 6 Addendum V – Screen Lockout Feature
- Download this manual
Advertisement
Table of Contents
Related Manuals for Smartrise SRU
Summary of Contents for Smartrise SRU
- Page 1 SRU S ECURITY ROGRAMMING ANUAL SRU Board www.smartrise.us | 1235 N. Union Bower Rd, Irving, TX 75061| 916.457.5129...
- Page 2 1 1 1 1 etc. 2. Enable CC Lockout (Yes/No) a. This item enables / disables the car call security inputs (CCE) on the SRU board and any programmed Access Codes. 3. Timed Lockout HC (Yes/No) a. This enables the hall call buttons to be locked out similar to Enable CC Lockout based on the time set in Start/Stop settings 4.
- Page 3 7. Per Floor Options – Floor # is the floor selected for security options a. Floor # (F)/(R) 24/7 (Yes/No) i. This will activate the specific floor’s security 24hours/day – 7 days/week. b. Floor # (F)/(R) Timed (Yes/No) i. This allows security for the specific floor to be active for a set period of time (see section 6).
- Page 4 If you forget your password, do the following: 1. Put the car on Inspection MR. 2. Turn on DIP switch 1 on Dip A to the right (ON) on the machine room SRU board. 3. Press the reset button. (The screen will unlock for 30 seconds).
Need help?
Do you have a question about the SRU and is the answer not in the manual?
Questions and answers