Master Station Automatic Refresh Parameter Settings - Mitsubishi ME96NSR Programming Manual

4.3.2

Master Station Automatic Refresh Parameter Settings

(1) The following shows an example of the parameter settings. See (2) for actual settings.
(2) Set the automatic refresh parameters using the following procedure.
(a) Set the remote input (RX) refresh device for "Remote input (RX)".
Default value : None
Setting range : Device name – Select from X, M, L, B, D, W, R or ZR.
Example) Set to X100
(b) Set the remote output (RY) refresh device for "Remote output (RY)".
Default value : None
Setting range : Device name – Select from Y, M, L, B, T, C, ST, D, W, R or ZR.
Example) Set to Y100.
(c) Set the remote register (RWr) refresh device for "Remote register (RWr)".
Default value : None
Setting range : Device name – Select from M, L, B, D, W, R or ZR.
Example) Set to W300.
Device number – Within the range of the device points that the CPU has.
Device number – Within the range of the device points that the CPU has.
Device number – Within the range of the device points that the CPU has.
(10/n)
LEN080334