When Connecting With A Back-Up Camera - Pioneer AVH-P7500DVD Installation Manual

Connecting the Units

When connecting with a back-up camera

When using this product with a back-up camera, automatic switching to video from a
back-up camera when the gear shift is moved to REVERSE (R) position is possible.
This product
We recommend that you use
a camera which outputs
mirror reversed images.
15 cm
Violet/white
Of the two lead wires connected to the back
lamp, connect the one in which the voltage
changes when the gear shift is in the REVERSE
(R) position.
Connection method
Note:
• It is necessary to set to BACK UP CAMERA in SETUP
when connecting the back-up camera.
9
Hide-away unit
RCA cable
(sold separately)
To video output
8 m
1. Clamp the lead.
Back up camera
Extension lead (supplied)
Fuse resistor
2. Clamp firmly with
needle-nosed
pliers.
Fig. 6