Icom IC-4088A Instruction Manual page 13

D D Rapid charging with the BC-119N+AD-105
q Insert the optional AD-105
charging slot of the BC-119N.
w Insert the battery pack, either by itself or attached to the trans-
ceiver, into the charger.
Turn the power OFF!
When the installed Ni-Cd
battery is nearly exhausted
and the function display
blinks in intermittently,
push [PWR] until the trans-
ceiver's power goes OFF.
*NOTE: Put the Ni-Cd
battery adapter into the
AD-105 rear slot when
the BP-202 is attached
to the transceiver.
AC adapter
Fix the 3-pin connector to the bottom of the charger with the
adhesive tape, etc., to prevent catching or touching the 3-pin
connector's terminals with the adapter's leads, etc.
DESKTOP CHARGER ADAPTER
IC-4088A
NOT used:
BATTERY CHARGING
BP-202
*
AD-105
BC-119N
3
into the
3
7