Advertisement
Quick Links
Model 6585 Handheld Controller Quick Reference Guide
Overview
Scope of this guide
This guide contains the following topics.
Operating the Handheld Controller
Program Mode
Introduction
The Model 6585 Handheld Controller is a portable terminal. It is used in the field to
enter the transponder ID into the Status Monitoring System. It also checks the alarm
status of a transponder and monitors analog channels, controls, and switches.
Note: The handheld controller does not contain any stored transponder data.
Topic
See Page
4
5
Advertisement
Related Manuals for Cisco 6585
Summary of Contents for Cisco 6585
- Page 1 Program Mode Introduction The Model 6585 Handheld Controller is a portable terminal. It is used in the field to enter the transponder ID into the Status Monitoring System. It also checks the alarm status of a transponder and monitors analog channels, controls, and switches.
- Page 2 The handheld controller has a 20-key keypad and a two line by 16 character backlit LCD. The first line is known as the previous active line and the second line is known as the active data entry line. Model 6585 Handheld Controller Quick Reference Guide 573109 Rev C...
- Page 3 Selects YES at a YES/NO prompt or LOW at a LOW/HIGH prompt. NO/0 Selects NO at a YES/NO prompt or HIGH at a LOW/HIGH prompt. Displays the ID Number prompt. • Not used. 573109 Rev C Model 6585 Handheld Controller Quick Reference Guide...
-
Page 4: Operating The Handheld Controller
Operating the Handheld Controller Mode of operation The Model 6585 Handheld Controller is powered by a transponder. To operate the handheld controller it must be connected to a transponder via the 9-pin cable. The handheld controller operates in two modes: the Program Mode and the Terminal Mode. -
Page 5: Program Mode
Program Mode Program mode menu configuration The menu configuration below illustrates how the handheld controller keypad functions operate in the Progam Mode. 573109 Rev C Model 6585 Handheld Controller Quick Reference Guide... - Page 6 Points to the Setup or Test menu. Quit This function can be used after you have finished setting up and testing the handheld controller. Note: It also enables you to return to the Terminal Mode. Model 6585 Handheld Controller Quick Reference Guide 573109 Rev C...
- Page 7 Key Beep The YES/NO option is not suppported at this time. Keyboard Setup Enables you to change the keyboard setup. Note: This function is not used with the Status Monitoring System. 573109 Rev C Model 6585 Handheld Controller Quick Reference Guide...
- Page 8 Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third party trademarks mentioned are the property of their respective owners.