Radio Operation - Toshiba CD328BT Instruction Manual

RADIO OPERATION

TUNING RADIO STATIONS
1. Press the FUNC. button on unit or on remote control to select the TUNER FUNCTION, this
unit is designed for FM ONLY.
2. Tune to desired station by rotating the TUNING knob on unit or by pressing TUN+/
key on remote control, the display will show the band frequency. Example: FM
TUN-/
97.10 MHz. If the radio receive Stereo signal, "STEREO" will show on the display.
3. Extend FM TELESCOPIC ANTENNA to its full length and gently move the unit back and
forth to get the best reception, or place the unit in an open location.
4.
To turn off the radio, press the FUNC. Button on unit or on remote control to switch to other
functions or press STANDBY button on unit or on remote control to turn off the unit
RADIO AUTO SCAN (SEARCH)
Press the /PAIR button on unit or
and program until having found a strong signal. The unit will start to broadcast the P01 after
searching finished.
Press the /+10 button on unit or FOLD./10/M UP/DOWN key on the remote control to
choose next programmed station.
RADIO STATION MEMORY OPERATION
You may pre-store 30 (FM) radio stations in memory for your preference, so as you can listen to
your desired station directly and quickly, no need to tuning and search for again.
1. Press PROG./P-MODE button on unit or press MEMORY KEY on remote control, "P01 " will
flash on the display. Then rotate the TUNING knob on the unit or press TUN-/
TUN+/ on remote control to select the first desired station.
2. Press PROG./P-MODE button on unit or MEMORY KEY on remote control, then press the
/+10 button or
choose the desired sequence you want to store, then press the PROG./P-MODE button on
unit or press MEMORY key on remote control again to enter.
3. Search another station, repeat steps (1) & (2) until all desired stations stored. Up to 30
stations can be programmed.
4. Press the
/-10 or
stored station directly.
CD/MP3 OPERATION
Discs for Playback
This system can playback all digital audio CD/MP3, finalized digital audio CD-Recordable
(CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs and CD-DA format digital
audio CD/CD-R/CD-RW discs.
LOADING A DISC
1. Press the FUNCTION button on unit or on remote control to select "CD" mode.
2. Press the PUSH TO OPEN button to open the CD door, "OPEN" will be shown on the
display.
3. Place an audio CD/MP3 DISC into the tray with the front side facing up.
4. Close the CD door.
key on remote control, the unit will conduct auto scan
/-10 on unit or TUN-/
/+10 or FOLD./10/M UP/DOWN button on remote to listen to the
or TUN+/
4
or
key on remote control to
,