Husqvarna 580BTS Mark II Operator's Manual page 3

7. Air filter
8. Starter rope handle
9. Fuel tank
10. Waist belt
11. Spark plug
12. Vibration damping system
13. Choke control
14. Handle
15. Stop switch with throttle position adjustment
16. Throttle trigger/Throttle switch
17. Stop switch
18. Pipe angle
19. Clamp
20. Flexible hose
21. Control pipe
22. Cable clamp
23. Intermediate pipe
24. Blower nozzle
25. Operator's manual
26. Combination wrench
Symbols on the product
WARNING! This product is dangerous.
Injury or death can occur to the operator or
bystanders if the product is not used
carefully and correctly. To prevent injury to
the operator or bystanders, read and obey
all safety instructions in the operator's
manual.
Read the operator's manual carefully and
make sure that you understand the
instructions before use.
yyyywwxxxxx
Note: Other symbols/decals on the product refer to
certification requirements for other commercial areas.
936 - 004 -
The blower can forcibly throw objects that can bounce back. This can
result in serious eye injuries if the recommended safety equipment is
not used.
The blower operator must make sure that no bystanders or animals
come nearer than 15 meters. Whenever several operators are work-
ing in the same work area, they should maintain a safe distance of at
least 15 meters from one another.
The rating plate shows the serial number. yyyy is the production
year, ww is the production week and xxxxx is the sequential number.
Use approved hearing protection and
approved eye protection. If the environment
contains dust, use a breathing mask.
Use approved protective gloves.
Refueling.
Air purge bulb.
Keep all parts of your body away from hot
surfaces.
Choke, open position.
Choke, close position.
3