Cisco WS-X45-SUP6L-E Installation And Configuration Note page 24

Attaching Module Interface Cables
Use extreme care when removing or installing connectors so that you do not damage the connector
Caution
housing or scratch the end-face surface of the fiber. Always install protective covers on unused or
disconnected components to prevent contamination. Always clean fiber connectors before installing
them.
Figure 11
Light out
of fiber
LC Connector
Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into
beams or view directly with optical instruments. Statement 1051
The LC fiber-optic connector, shown in
provides high-density fiber connectivity. The LC connector can be used with either MMF cable or SMF
cable. The LC connector uses a latching clip mechanism that is similar to the one used on the RJ-45
copper connector.
Make sure that the optical connectors are clean before making the connections. Contaminated connectors
Note
can damage the fiber and cause data errors.
Figure 12
Installation and Configuration Note for the Cisco Catalyst 4500 E-Series Supervisor Engine 6L-E
24
SC-Type Fiber-Optic Connector
Plug
Keys
Cable
Receptacle
Light into
fiber
Key slots
LC Fiber-Optic Connector
Figure 12, is a small form-factor fiber-optic connector that
OL-19334-02