PicoBrew Z1 Assembly Manual

PICOBREW Z SERIES
ASSEMBLING YOUR Z2

You Will Need:

• Two Each: Heating Module (Box #1)
and Ingredients Module (Box #2)
• Included T20 driver

Assemble the Base Z Unit First

1
Build Unit 1 as shown in the Z1 Quick Start
Guide. This will be the bottom unit of your Z2.
2 Remove the 4 Screws on the Top of your
already assembled base unit.

Prepare the Top Z Unit

For the Ingredients Module of the top unit, remove the floor by unscrewing
3
the 7 Screws connecting the Ingredients Module walls to the floor.
REMOVE RUBBER MAT
TO EXPOSE SCREWS
ZN Assembly
Information Online
For a complete set of operating
instructions, please refer to the online
manual for your Z Series brewing machine
www.picobrew.com/ZManual
at:
UNSCREW 7
SCREWS
REMOVE FLOOR
& PROCEED
V.19.93.15