Subscribe to Our Youtube Channel
Related Manuals for QMotion QIS
Summary of Contents for QMotion QIS
- Page 1 Qadvanced Intelligent System (QIS) Application Guide REVISION 1.2 18JAN16 9000233 ...
- Page 2 Qadvanced Intelligent System (QIS) System Overview Power Supply: 24 VDC, 7.5A RJ‐45 Ports for Motorized Shades and Switches ‐ Quan ty 8 Communica on Ports (RJ‐45) ‐ Quan ty 2 9000233 REVISION 1.2 18JAN16 ...
- Page 3 Cat5e or Cat6 cables are not provided and must be purchased separately. Shielded wire may be used, but is not required. For installations where the QIS cables may be in close proximity to other wiring, it may be advisable to use shielded cables to protect against possible interference.
- Page 4 Qadvanced Intelligent System (QIS) Hardwired Switch Application Hardwired Switch Wire Specification: Power and Category 5e/Category 6 for Communication Panel use with RJ-45 Connector 24 AWG Maximum length of wire from Power/Communication Panel to device: - Up to an 8’ X 8’ Shade with...
- Page 5 Router capacity: 32 devices Maximum Range: QIS ZigBee network devices have a 50 feet radius range. A network of devices can be connected to create cumulative ranges that can span over hundreds of feet. *Environmental conditions may affect individual results. All range dimensions are based on an unob- structed environment or free range.
- Page 6 Qadvanced Intelligent System (QIS) Third Party Integration Power and Communication Panels 24 VDC Power Supplies RS485 Communication Third Party Wire Specification: Integration Category 5e/Category 6 for use with RJ-45 Connector 24 AWG Maximum length of wire from Power/Communication Panel to device : - Up to an 8’...
- Page 7 Qadvanced Intelligent System (QIS) Third Party Integration with Hardwired Switch and ZigBee HA1.2 Power and Communication Panels 24 VDC Power Supplies Power and Communication Panels Hardwired Switch 24 VDC Power Supplies RS485 Communication Third Party Integration Qube (Coordinator) and / or...
- Page 8 ® Warning: Changes or modifications to this device not expressly approved by QMotion Incorporated -Advanced Shading Systems could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Need help?
Do you have a question about the QIS and is the answer not in the manual?
Questions and answers